Faber LP-27 (4L) Cylinder, Black for CCR

In Stock
A Faber LP-27 4L steel cylinder and valve suitable for use in rebreather applications.

Prices include FREE continental 48 U.S. shipping!

Cylinder prices do NOT include international shipping. Our cylinders and valves are Imperial 3/4 NPS neck threads, NOT Metric M25 neck threads, and the valves have overpressure relief devices. The cylinders have US DOT and Canadian CTC markings suitable for use only in North America. Our cylinders and valves are NOT CE approved and NOT suitable for use in the European Union.

NOTE:  SCUBA Tanks must be hydrostatically tested every five years (60 months). We always ship Faber cylinders with a current hydro test date. Due to manufacturing and import cycles, the popular sizes of Faber cylinders typically have a factory hydro date less than 12 months old. However less popular sizes of Faber cylinders may have an older factory hydro date as these are manufactured and imported less frequently.

Faber LP-27 (4L) Cylinder, Black for CCR

Faber LP-27 (4L) Cylinder, Black for CCR
Faber LP-27 (4L) Cylinder, Black for CCR
  • Compact and lightweight Low Pressure steel cylinder
  • Hot-zinc spray coating protected with epoxy paint (Black color)
  • Nitrox Ready tank and valve - Offers a 2640 psi service pressure
  • Has phosphatized internal surface to create a corrosion resistant barrier
  • Diameter of {5.46 in | 13.8 cm} and height of {14.43 in | 36.5 cm}

These Faber low pressure series cylinders were manufactured in Italy by Faber Industries, the Blue Steel brand cylinders are available in a durable and environmentally friendly hot-zinc spray coating that is further protected with epoxy paint.

We ship your Nitrox Ready cylinder with the valve installed (domestic US only). The valve included in our price is a very high quality DGX Premium valve. Cylinders will have a current month decal.

More Information
Brand Faber
Weight 13.000000
Tek Tip Warning Image WARNING
According to our suppliers, their Nitrox Ready and Oxygen Service products are compatible with oxygen and factory cleaned for use with compressed gases in excess of 23.5% oxygen. Nonetheless, the 'clean state' of this equipment applies only prior to initial use. Thereafter, periodic inspection and cleaning are a necessity. You must meticulously follow the recommendations of the US Department of Transportation (DOT), Compressed Gas Association (CGA), and other federal/state/local agencies, plus your dive training agency for equipment maintenance, handling, storage, labeling, filling, transport and use of compressed gases. Oxygen-related fires and explosions can result in serious injury or death. Ultimately, you must make the final decision to assume all risks associated with the use of any compressed gases, including those in excess of 23.5% oxygen.
Message Icon