DGX Custom - Aluminum 80 Doubles Package

As low as $576.95
In Stock
SKU
PK-721005
A complete Double Cylinder Package from Dive Gear Express consists of: two cylinders, premium quality manifold with isolator, premium quality bands and bolts, left and right manifold port plugs.

Prices for double cylinder and manifold packages do NOT include free shipping.

Questions? Cylinder FAQ and Valve FAQ

DGX Custom - Aluminum 80 Doubles Package

AL80 Doubles Package w/ Choice of Manifold
AL80 Doubles Package w/ Choice of Manifold Manifold Options How We Pack a Cylinder for Shipment

Double AL-80's are a value priced solution for light open water technical diving, and when configured as left and right singles are extremely popular for sidemount. A complete Double Cylinder Package from Dive Gear Express consists of: two cylinders, premium quality manifold with isolator, premium quality bands and bolts, left and right manifold port plugs. The cylinders each have a current month Nitrox Ready decal and depending on shipping restrictions normally arrive with modular valves and plugs installed, ready-to-use as independent single cylinders and ready-to-assemble as doubles.

  • TWO Nitrox-Ready Aluminum 80 Cylinders
  • Premium Quality Manifold with Isolator
  • Premium Quality Bands and Bolts
  • Left and Right Manifold Port Plugs (not shown)
  • Current Nitrox Ready Decal †

† Our shop evidence of inspection 3" X 6" dated decal (aka "VIP sticker") states "this cylinder and valve are suitable for service with compressed gases containing greater than 23.5% oxygen." That means the cylinder and valve, prior to initial use, are oxygen clean and oxygen compatible. If you plan to use this cylinder with gases containing more than 40% oxygen then the upgrade to our DGX Premium Oxygen Valve is suggested.

A typical hogarthian equipment backmount configuration is these 7.25-inch diameter aluminum cylinders with a DIR harness, steel backplate, wing and a wetsuit. Many divers also like to add a V Trim Weight to aluminum doubles. Assembling a set of doubles is easy if you follow the detailed instructions we provide.

Questions? Cylinder FAQ and Valve FAQ

More Information
Brand DGX
SKU PK-721005
Weight 80.000000

Aluminum Cylinders at Dive Gear Express

Features of All Aluminum SCUBA Tanks
from Dive Gear Express

  • Manufactured in North America
  • 6061 alloy, an aluminum-magnesium-silicon blend
  • Both U.S. DOT-3AL and Canadian TC-3ALM markings
  • 0.750-14 NPS (3/4 NPS) threaded neck opening
  • Cylinder and valve are Nitrox Ready
 

How to Select a SCUBA Tank

Our factual but easy-to-read article helps you make this big decision by giving you information on:

  • Aluminum tanks versus steel tanks
  • Low-pressure tanks versus high-pressure tanks
  • Tank paints, coatings, and finishes
  • Tank dimensions and capacity recommendations

Read How to Select a SCUBA Tank.

SCUBA Tanks must be hydrostatically tested every five years (60 months). The larger primary cylinders typically have a factory hydro date between 3 and 9 months old, but not more than 12 months old. Smaller cylinders may have a factory hydro date up to 24 months old as these are manufactured less frequently.

Our cylinders and valves are Imperial 3/4 NPS neck threads, NOT Metric M25 neck threads, and the valves have overpressure relief devices. The cylinders have US DOT and Canadian CTC markings suitable for use ONLY in North America. Our cylinders and valves are NOT CE approved and NOT suitable for use in the European Union. Cylinders are NOT marked appropriately for use in Australia and New Zealand.

Aluminum Cylinders at Dive Gear Express

Cylinder Brand† Service
Pressure
Water
Volume
True Air †
Capacity
Diameter
(inches)
Height *
(inches)
Weight *
(pounds)
Buoyancy **
Full : 500psi (pounds)
Aluminum 6 Metal Impact 3000 psi ~0.8L 5.8 ft3 3.20 10.9 2.7 - 1.6 : - 1.5
Aluminum 8 Metal Impact 2015 psi ~1.5L 7.6 ft3 4.38 10.8 3.8 + 1.5 : + 2.0
Aluminum 13 Metal Impact 3000 psi ~2L 12.8 ft3 4.38 12.7 6.0 - 1.1 : - 0.3
Aluminum 19 (tall) Metal Impact 3000 psi ~3L 18.3 ft3 4.38 17.3 7.9 - 1.7: - 0.6
Aluminum 19 (Short) Catalina 3000 psi ~3L 19.3 ft3 5.25 13.8 9.2 - 2.1 : - 0.7
Aluminum 30 Metal Impact 3000 psi ~4L 29.1 ft3 5.25 19.5 12.3 - 1.6 : - 0.3
Aluminum 40 Metal Impact 3000 psi ~5L 38.8 ft3 5.25 24.9 15.3 -1.0: + 1.4
Aluminum 72 Metal Impact 3000 psi ~10L 69.9 ft3 6.89 26.0 27.8 - 0.9 : + 3.5
Aluminum 80 Metal Impact 3000 psi ~11L 77.5 ft3 7.25 26.1 31.9 - 1.5 : + 3.3
* Height and weight is for cylinder only, i.e. less valve.
** Buoyancy specification is for cylinder and valve in seawater.
Specifications are NOMINAL and supplied by XS Scuba - Sea Pearls as of 2020.

†  Visit Calculating SCUBA Cylinder Free Gas Capacities for more information about True Capacity values.




     
Message Icon