Dive Rite Adjustable Bungee System (ABS)
- Allows fast and easy customization to fit any sidemount diver
- Will support even the heaviest of steel tanks without slipping
- No knots, no tools - loosen the weave at the plate, adjust to length and re-tighten
- High quality, tight weave ¼” bungee for long life and just the right amount of stretch
- Includes Qty 1 complete bungee - order Qty 2 if you need a pair
The Dive Rite Adjustable Bungee System (ABS) allows fast and easy customization to fit any sidemount diver. The bungee cord is weaved through a custom designed, laser cut Delrin plate providing an infinitely adjustable bungee. The bungee will support even the heaviest of steel tanks without slipping thanks to the unique weaving pattern. There are no knots to tie and no tools are required--just loosen the weave at the plate, adjust to the correct length, and re-tighten. Make quick work of fine tuning your sidemount system and easily adjust for different sized tanks or varying thicknesses of exposure protection. They are also ideal for instructors and rental programs that need to quickly size the bungees for their customers.
The Adjustable Bungee System can also be quickly changed between Dive Rite’s standard ring bungee system, loop bungees with a snap, or traditional loop bungees. Simply unweave the bungee, add or remove hardware as necessary, and re-weave. The bungees can be easily attached to any of Dive Rite’s sidemount harnesses using the daisy chain webbing attachment point. Alternatively they can be attached to any small D-ring or quick link attached to the side of a standard backplate or harness.
The ABS uses high quality, tight weave ¼” bungee for long life and just the right amount of stretch. If the bungee does get damaged it is easily replaceable in the field. The system includes the bungee, weaving plate, and ring bungee hardware including a 2” stainless steel ring, medium quick link, and medium bolt snap. Sold as Qty 1 complete bungee - order Qty 2 if you need a pair.
Adjustable Bungee System Includes items below to create Qty 1 complete bungee:
- HW1026 Medium Stainless Bolt Snap
- HW1021SS 2 inch Stainless Ring
- HW1014SS Medium Stainless Quick Link
- 30 inches (76.2 cm) of 1/4 inch (6.35 mm) Bungee
- Delrin bungee plate
Read a great article from Dive Rite about Sidemount Bungee Systems
Most Helpful Customer Reviews
Adjustable Bungee System
on 18 April, 2018Being new to sidemount I knew I wasn't going to get exact measurements right and things will change as I get better. This system allowed me to adjust as I needed and is even built so you can make the length permanent once I get it right. It made starting out easy, was an excellent modular way to update my current rig without having to by a whole new set of kit. I als I liked the logic behind it - check out the YouTube videos.Comment Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again