Toggle Nav
My Cart
Search
Advanced Search
Menu

Aluminum 19 (3L) Cylinder for CCR

$134.00
In Stock
SKU
PK-AL19CCR
A small aluminum 19 (3L) cylinder and valve suitable for use in rebreather applications.
Add to Wish List

Prices include FREE continental 48 U.S. shipping!

Cylinder prices do NOT include international shipping. Our cylinders and valves are Imperial 3/4 NPS neck threads, NOT Metric M25 neck threads, and the valves have overpressure relief devices. The cylinders have US DOT and Canadian CTC markings suitable for use only in North America. Our cylinders and valves are NOT CE approved and NOT suitable for use in the European Union.

NOTE:  SCUBA Tanks must be hydrostatically tested every five years (60 months). Small cylinders are not frequently manufactured and typically have a factory hydro date between 6 and 18 months old.

Aluminum 19 (3L) Cylinder for CCR

Aluminum 19 (3L) Cylinder for CCR
Aluminum 19 (3L) Cylinder for CCR

We ship your Nitrox Ready Aluminum 19 (3L) cylinder with the valve installed (domestic US only). The valve included in our price is a very high quality DGX Premium valve. Cylinders will have a current month decal.

More Information
SKU PK-AL19CCR
Weight 11.000000
Brand XS Scuba
Tek Tip Warning Image WARNING
According to our suppliers, their Nitrox Ready and Oxygen Service products are compatible with oxygen and factory cleaned for use with compressed gases in excess of 23.5% oxygen. Nonetheless, the 'clean state' of this equipment applies only prior to initial use. Thereafter, periodic inspection and cleaning are a necessity. You must meticulously follow the recommendations of the US Department of Transportation (DOT), Compressed Gas Association (CGA), and other federal/state/local agencies, plus your dive training agency for equipment maintenance, handling, storage, labeling, filling, transport and use of compressed gases. Oxygen-related fires and explosions can result in serious injury or death. Ultimately, you must make the final decision to assume all risks associated with the use of any compressed gases, including those in excess of 23.5% oxygen.

Aluminum Cylinders at Dive Gear Express

Features of All Aluminum SCUBA Tanks
from Dive Gear Express

  • Manufactured in North America
  • 6061 alloy, an aluminum-magnesium-silicon blend
  • Both U.S. DOT-3AL and Canadian TC-3ALM markings
  • 0.750-14 NPS (3/4 NPS) threaded neck opening
  • Cylinder and valve are Nitrox Ready
  

How to Select a SCUBA Tank

Our factual but easy-to-read article helps you make this big decision by giving you information on:

  • Aluminum tanks versus steel tanks
  • Low-pressure tanks versus high-pressure tanks
  • Tank paints, coatings, and finishes
  • Tank dimensions and capacity recommendations

Read How to Select a SCUBA Tank.

SCUBA Tanks must be hydrostatically tested every five years (60 months). The larger primary cylinders typically have a factory hydro date between 3 and 9 months old, but not more than 12 months old. Smaller cylinders may have a factory hydro date up to 24 months old as these are manufactured less frequently.

Our cylinders and valves are Imperial 3/4 NPS neck threads, NOT Metric M25 neck threads, and the valves have overpressure relief devices. The cylinders have US DOT and Canadian CTC markings suitable for use ONLY in North America. Our cylinders and valves are NOT CE approved and NOT suitable for use in the European Union, and NOT marked appropriately for use in Australia and New Zealand.

Aluminum Cylinders at Dive Gear Express
Cylinder Brand† Service
Pressure		 True Air †
Capacity		 Diameter
(inches)		 Height *
(inches)		 Weight *
(pounds)		 Buoyancy **
Full : Empty (pounds)
Aluminum 6 Metal Impact 3000 psi 5.8 ft3 3.20 10.9 2.7 - 1.8 : - 1.4
Aluminum 8 Metal Impact 2015 psi 7.6 ft3 4.38 10.8 3.8 + 1.5 : + 2.0
Aluminum 13 Metal Impact 3000 psi 12.8 ft3 4.38 12.7 6.0 - 2.1 : - 1.3
Aluminum 19 Metal Impact 3000 psi 18.3 ft3 4.38 17.3 7.9 - 1.9 : - 0.7
Aluminum 20 Catalina 3000 psi 20.1 ft3 5.25 13.8 9.2 - 1.4 : - 0.0
Aluminum 30 Metal Impact 3000 psi 29.1 ft3 5.25 19.5 12.3 - 2.0 : - 0.1
Aluminum 40 Luxfer 3000 psi 40.0 ft3 5.25 24.6 15.3 -0.7: + 1.8
Aluminum 40 Metal Impact 3000 psi 38.8 ft3 5.25 24.9 15.3 -1.0: + 1.4
Aluminum 72 Metal Impact 3000 psi 69.9 ft3 6.89 26.0 27.8 - 0.7 : + 2.8
Aluminum 80 Luxfer 3000 psi 77.6 ft3 7.25 26.1 31.4 - 1.4 : + 3.4
Aluminum 80 Metal Impact 3000 psi 77.5 ft3 7.25 26.1 31.9 - 1.5 : + 3.3
* Height and weight is for cylinder only, i.e. less valve.
** Buoyancy specification is for cylinder and valve in seawater.
Specifications are NOMINAL and supplied by XS Scuba - Sea Pearls as of 2018.

†  Visit Calculating SCUBA Cylinder Free Gas Capacities for more information about True Capacity values.
Tek Tip Link




      Message Icon
Message Icon