- Traditional rubber with chromed brass fittings
- 43" long hose is Nitrox Ready
- Standard regulator hose: 3/8-inch male to 1st stage - 9/16-inch female to 2nd
Regulator Rubber Hose - 43-inch length
This 48" long rubber low pressure regulator hose is a 3/8-inch male at the end that screws into the first stage LP port, and at the other end you'll find a 9/16-inch female that screws onto the second stage regulator body.
| Product Name | Regulator Rubber Hose - 43-inch length |
|---|---|
| Weight | 12 oz |
| Brand | DGX |
| SKU | DX-706443 |
| Country of Manufacture | Taiwan |
| HS Code | 9506.29 |
Customer Reviews
Warning
Keep in mind that all SCUBA hoses, both rubber or polyester, will fail sooner or later either due to age, storage conditions or handling. Scuba hoses, regardless of brand and materials, require some minimal care. Do not allow hoses to receive prolonged exposure sunlight, as the heat and UV from strong sunlight will significantly shorten the life of the hose. Do not attempt to flush the inside of the hose with any form of solvent or other chemical, new hoses are factory clean and if you have any reason to think they are no longer clean then the hose should be replaced. Prior to every dive trip you should always pressurize and inspect your hoses for mechanical damage, corroded fittings, bulges and leaks. Dive Gear Express suggests replacing all SCUBA hoses every five years or 500 dives, whichever comes first.