Regulator Hoses { 40 in | 102 cm }

In Stock
Regulator Hose { 40 in | 102 cm } in your choice of colors and construction - DGX Braided Flex or DGX Rubber.

Regulator Hoses { 40 in | 102 cm }

DGX Flex Color Options
DGX Flex Color Options DGX Rubber Color Options
  • Choose DGX Braided Flex or Rubber
  • Multiple color choices to designate specific use
  • 3/8-inch male to 1st stage - 9/16-inch female to 2nd
  • All hoses are Nitrox Ready

Increasingly we see our experienced single tank divers using a { 40 in | 102 cm } hose routed under their arm with the primary regulator on 90° swivel - this hose is usually black. The { 40 in | 102 cm } hose is also the common choice for the alternate regulator used on traditional sport diving "octopus" configurations - this hose is often yellow. { 40 in | 102 cm } is also the most popular length for technical diving stage and deco regulators as well. Hoses used with technical diving regulators on cylinders containing Nitrox mixtures are sometimes yellow and hoses used with Oxygen (or extremely rich Nitrox mixtures) are often green.

All these hoses are Nitrox Ready.

More Information
Brand DGX
Weight 0.450000

Customer Reviews

Tek Tip Warning Image WARNING

Keep in mind that all hoses will fail sooner or later either due to age, storage conditions or handling. Scuba hoses, regardless of brand and materials, require some minimal care. Do not allow hoses to receive prolonged exposure sunlight, as the heat and UV from strong sunlight will significantly shorten the life of the hose. Do not attempt to flush the inside of the hose with any form of solvent or other chemical, new hoses are factory clean and if you have any reason to think they are no longer clean then the hose should be replaced. Prior to every dive trip you should always pressurize and inspect your hoses for mechanical damage, corroded fittings, bulges and leaks. Dive Gear Express suggests replacing all SCUBA regulator hoses every five years of service or 500 dives, whichever comes first.