Once a cylinder clamp has been tightened on to the cylinder, the long tail of the metal clamp typically protrudes at an angle and may interfere with handling of the stage bottle or even cutting exposure suits. The primary primary purpose of the nylon tubular webbing sheath is to provide a cover to manage the excess tail of the clamp once it has been tightened on to the cylinder. These lengths of tubular nylon webbing are hot knife pre-cut to eliminate fraying and are available in 4 different lengths depending on the cylinder diameter. We also include a nylon webbing worm drive cover for additional protection.

X-Small sheath fits clamps for cylinders approximately {4.40 in | 11 cm} in diameter (AL-13, AL-19)
Small sheath fits clamps for cylinders approximately {5.25 in | 14 cm} in diameter (AL-30, AL-40, LP-45, LP-50)
Large sheath fits clamps for cylinders approximately {7.25 in | 18 cm} in diameter (LP-72, LP-80, AL-80, HP-80, LP-85, HP-100)
X-Large sheath fits clamps for cylinders approximately {8.00 in | 20 cm} in diameter (LP-95, AL-100, LP-104, HP-119, HP-130)

NOTE: We only offer 2 sizes of stainless steel clamps but offer 4 sizes of tubular webbing sheaths for a more precise fit when attached to the correct size cylinder.