Replacement continuous harness webbing { 15 ft | 4.6 m } made of { 2 in | 5 cm } marine grade nylon webbing with a stainless steel grommet installed centered on the length and width. It is long enough to fit even the largest individuals, most divers will need to trim at least one or two feet from each end - after trimming just singe the ends with the flame from a lighter.

Our webbing is rot-proof, waterproof, and resistant to mold, mildew and UV. It is suitable for marine applications. Webbing widths have an industry standard tolerance of { ±1/6-in | ±2-mm }. The { 2 in | 5 cm } nylon webbing is the typical thickness, well suited for use in backplate harness rigging and general-purpose diving applications. Our webbing is what we believe to be the correct amount of compromise between flexibility and stiffness for the specific application of SCUBA diving BCD harnesses - stiffer than "seat-belt" webbing but less stiff than "tank-strap" webbing. The webbing may seem a little too stiff at first, but once wet and "broken-in" it will be the correct amount of stiffness to hold a shape and be comfortable.

The grommet is a rolled rim size #3 with a hole size of approximately 1/2-inch and an outside diameter of approximately 1-inch. This is not a nickel plated brass self-piercing grommet typically used for fashion accessories, the grommet is a stainless steel two piece grommet set.