Apeks Surface Marking Tube { 4.6 ft | 1.4 m }
- { 4.6 ft | 1.4 m } long by { 6 in | 15 cm } wide
- Easy-to-use oral inflation valve allows for easy one handed operation
- Two eyelets at the top of the SMB provide secure attachment points for a glow stick, strobe or slate
- Designed for perfect stowage with the Apeks Lifeline Ascend Reel (see video above)
Apeks Surface Marking Tube { 4.6 ft | 1.4 m }
The Apeks SMB measures { 4.6 ft | 1.4 m } by { 6.0 in | 15 cm } and is available in your choice of orange or yellow. The Apeks marker is a fully closed system that can be fully inflated orally on a single breath, meaning fast deployment on the surface or at depth. The closed design with an over pressure relief valve (OPV) eliminates the chance that gas will escape from the bag once it reaches the surface. Both sides of the surface marker have a large area of SOLAS reflective tape to ensure maximum visibility. Two large eyelets at the top allow you to attach a glow stick, strobe or slate and the bottom has a full sized stainless steel D-ring plus a sewn-in bungee loop to help make for compact storage. The bag has heat sealed and fully taped edges for durability.
- Easy-to-use oral inflation valve allows for easy one handed operation.
- Full sized stainless steel D-ring allows for easy attachment to reel or spool.
- Two eyelets at the top of the SMB provide secure attachment points for a glow stick, strobe or slate.
- SOLAS reflective tape on both sides ensures maximum visibility.
- Over pressure relief valve with oversized pull-dump ensures ease of use even when wearing gloves.
- Sewn-in bungee loop with large rubber pull tab allows for easy stowage and deployment even when wearing gloves.
- Designed for perfect stowage with the Apeks Lifeline Ascend Reel (see video above.)
- Fully taped and heat sealed edges ensure the SMB is extremely durable.
Although a marking tube should not be used as a lift bag, a fully inflated tube may be considered to have approximately { 10 lb | 5 kg } of lift when completely submerged.
Brand | Apeks |
---|---|
SKU | APX-RE1250X01 |
Weight | 1.000000 |
Customer Reviews
This device includes a non-locking hose quick-connect that supports easy and rapid power-inflation at the surface using the standard quick-disconnect low-pressure BC inflator hose. However, there are some safety concerns using that mode for deployment while at depth. Disconnecting the inflator hose from your BC at depth could compromise your buoyancy control in an emergency. Although the inflation connector on the device is non-locking, there is a possibility connectors could jam and fail to easily separate if the connectors are not clean and well maintained. As with any such bag, it is also possible to create enough lift such that it could begin to drag you to the surface if there is any delay in release and the rapid power-inflation feature can reduce the time available before release.
For deployment at depth we suggest using either a Y-adapter or an alternate low-pressure quick-disconnect inflator hose mounted on a stage or bailout bottle, rather than disconnecting the primary BC inflator hose, for power inflation of this device. If this is your first experience with power-inflation SMB or lift-bag deployment at depth, first practice this type of deployment under controlled conditions.