PSR-11-39-MHD Oxygen Sensor
- Oxygen sensor with 3-pin Molex connection
- Accuracy within +/- 2% of full scale
- Response time is 6 seconds
- Dated test results included with each sensor
- Use only when recommended by your rebreather OEM
PSR-11-39-MHD Oxygen Sensor
Factory fresh, this oxygen sensor is never more than four months old when we ship to you. Due to the unique nature of the product, this diving grade oxygen sensor is NON-RETURNABLE. Your complete satisfaction is our goal, so please consider carefully before purchase.
The Analytical Industries (AI) PSR-11-39-MHD is a special version of the PSR-11-39-MD which provides a slightly higher mV range. Do not use the MHD version unless recommended by the rebreather OEM for your specific unit because otherwise some sensor validation checks may produce misleading results.
Features
- Accuracy within +/- 2% of full scale
- Response time is 6 seconds
- Conformal coating
- Temperature compensated
- Hydrophobic membrane
AI brand diving sensors ship with the documentation of a final pressure test for each sensor. The sensor is tested at approximately one ATA in air and 100% oxygen, then tested again at 1.8 ATA in oxygen, and the millivolt readings are recorded for all measurements. The results document that the cell is within specifications for current and linearity up to a PO2 exceeding 1.6 ATA. The dated test results are included in the package with each individual sensor.
We are a high volume retailer of AI brand diving sensors, assuring that replacement sensors ordered from Dive Gear Express are always among the freshest available. Due to the unique nature of the product, this diving grade oxygen sensor is NON-RETURNABLE. Your complete satisfaction is our goal, so please consider carefully before purchase.
| Brand | Analytical Industries |
|---|---|
| SKU | ADI-PSR-11-39-MHD |
| Weight | 0.250000 |
Customer Reviews
WARNING
Dive Gear Express has not done any verification or validation of rebreather oxygen sensors and disclaims any responsibility and liability for the use of oxygen sensors in rebreather applications. Verification and validation of specific oxygen sensors for use in rebreather applications is the responsibility of the equipment user and/or original equipment manufacturer.
Oxygen sensors are one of the very few items on our website that are NOT returnable, because we can't know with absolute certainty how they were handled once delivered. Additional shipping and handling of the return can also degrade performance. They are critical to safety in rebreather diving, and our customers have a reasonable expectation of receiving as factory fresh a product as possible from Dive Gear Express. Your complete satisfaction is our goal, so please consider carefully before purchase.