This replacement oral & power inflator from the HydPro X01 series is a safe, easy to maintain, and reliable power inflator that lasts over time. This is the Tech model with buttons and internal parts made of metal alloys that are designed to be field serviceable and features exceptional control of power inflation with a piston-based inflation system, specifically designed and produced for technical and professional use. The profile and tolerance values of the piston system ensures greater wear resistance and in particular a better response to calcium deposits. It is also possible to adjust the softness of the buttons, choosing from two different degrees of thrust force. The air passage sections also have enhanced exhaust capacity.

The X01 oral and power inflator fits the 3/4-inch inside diameter corrugated rubber hose found on most sport BCDs and some technical wings. This product does not include attaching hardware (ie. zip ties or clamps that secure the product to your corrugated hose.)The attaching hardware is available separately.

See Product Attachments tab for periodic service manual and illustrated parts schematic diagram.

Some inflation assemblies have a cable that runs through the inside of the corrugated hose. This cable is attached to the power inflator using the pin, such that if you pull down on the inflator itself (and thus pull the cable), a dump valve at the top of the inflator assembly is activated. This feature is usually called 'pull-to-dump' or 'remote-exhaust.' Your inflation assembly may or may not have the feature and the cable, but we include a replacement pin just in case you do need one. If the pin turns out to be unneeded you may safely discard it.