All of the performance and reliability of the Dive Rite XT1 first stage regulators is also available in a fixed position port design. Flat LP and HP ports allow hoses to run straight out from the side of the regulator for more streamlined hose routing. Simple and compact, the FT1 has work of breathing performance on par with the premier regulators on the market. Rugged construction and a new wear resistant Sn-Ni plating mean this regulator will continue to look as good as it performs.

• Balanced diaphragm first stage design maintains consistent IP and gas delivery regardless of depth or tank pressure.
• 4 low pressure ports and 2 high pressure ports.
• All ports are angled 90 degrees from the DIN/Yoke fitting for ideal hose routing.
• Environmentally sealed to protect against internal corrosion, contaminants, and freezing.
• Nitrox Ready.
• Also available in native Yoke version.

The body of the FT1 first stage regulator has hose ports oriented such there is not room to accept a wireless tank pressure transmitter without interfering with hose routing. The solution is to use a standoff adapter, or some divers prefer to use a short HP hose pigtail (do not forget the required Air Spool) in place of the standoff.

Please note that when this first stage is sold "raw" as received from the factory and not as part of a package that includes a second stage, it will have three of the four LP ports plugged (i.e. one LP port will be open) and both HP ports will be plugged.