XS Low Pressure BC Inflator Hose Plugs - Delrin (set of 2)

$10.95
In Stock
SKU
XSS-TL131

These plugs safely and securely seal your hose from harmful contaminants.

XS Low Pressure BC Inflator Hose Plugs - Delrin (set of 2)

XS Low Pressure BC Inflator Hose Plugs - Delrin (set of 2)
XS Low Pressure BC Inflator Hose Plugs - Delrin (set of 2)
  • Durable Non-corrosive Delrin material
  • Protect Low Pressure BC hoses from contaminents
  • Creates a watertight seal
  • Male has QD and Female has 3/8 threads
  • Not designed to be used under pressure

These plugs safely and securely seal your hose from harmful contaminants.

Often during the servicing of regulators, the hose ends are submerged into a solution used for cleaning metal regulator parts. This is an effective way to remove corrosion from hose fittings, but at the same time you may be damaging the inner lining of the hose. The interior of scuba hoses should never be exposed to any type of cleaning solution. The damage that can occur is the reduction of pressure holding strength, the break-down of the inner lining resulting in the potential reduced flow of gas and premature failure of the hose.

It is the recommendation of XS Scuba that the ends of all scuba hoses be sealed and plugged during servicing to insure that the inner lining are protected from cleaning solutions. Note: If the interior of hoses requires cleaning because of contamination, the recommendation is to flush with only hot water followed by purging with dry, clean compressed air.

    Features:

  • Male Plug: Standard BC quick-disconnect with o-ring seal
  • Female Plug: 3/8 - 24 threads
  • Never pressurize hose with plugs in place
More Information
SKU XSS-TL131
Brand XS Scuba
Weight (lbs) 0.2500
There are no reviews yet Be the first to review this product
Only registered users can write reviews. Please, Sign in or create an account


Conditions of Use    Privacy Notice   

© Copyright 2009 to 2018 Dive Gear Express®