Regulator Miflex2 XTREME Hoses

100% of 100
In Stock
The flexibility of the Miflex2 XTREME regulator hose makes the second stage more comfortable in the mouth and results in smoother hose routing, particularly with long hoses.

Regulator Miflex2 XTREME Hoses

Regulator Miflex2 XTREME Hoses
  • Double-braiding resists snags and abrasions
  • Kink resistant with chromed brass fittings
  • More flexible - 1/3 lighter - UV resistant
  • 3/8-inch male to 1st stage - 9/16-inch female to 2nd
  • All hoses are Nitrox Ready

Available in lengths ranging from { 6 in | 15.2 cm } to { 84 in | 213.4 cm }. These low pressure hoses are great for stage/deco bottles, and we offer the { 40 in | 1.0 cm } length commonly used for stage/deco and octo hoses in your choice of three colors: black, green, and mellow yellow. This low pressure regulator hose has a standard 3/8-inch male at the end that screws into the first stage LP port, and at the other end you'll find a standard 9/16-inch female that screws onto the second stage regulator body.

The extreme performance double braided flex SCUBA hoses manufactured by Miflex2™ are subjected to more than 30 individual performance and safety automated tests. All Miflex2 hoses are certified to conform to the CE EN250 standard and Nitrox Ready.

More Information
Weight (lbs) 0.4000
Brand Miflex2
Customer Reviews
Most Helpful Customer Reviews
  1. Great gear



    great gear, speedy deliver
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  2. Good service



    I received the hoses in just a couple of days. Quality is good, put them right to use.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
Post a comment as
Only registered users can write comments. Please, Sign in or create an account
Only registered users can write reviews. Please, Sign in or create an account
Tek Tip Warning Image WARNING

Keep in mind that all SCUBA hoses will fail sooner or later either due to age, storage conditions or handling. Scuba hoses, regardless of brand and materials, require some minimal care. Do not allow hoses to receive prolonged exposure sunlight, as the heat and UV from strong sunlight will significantly shorten the life of the hose. Do not attempt to flush the inside of the hose with any form of solvent or other chemical, new hoses are factory clean and if you have any reason to think they are no longer clean then the hose should be replaced. Prior to every dive trip you should always pressurize and inspect your hoses for mechanical damage, corroded fittings, bulges and leaks. Dive Gear Express suggests replacing all SCUBA hoses every five years or 500 dives, whichever comes first.

Choosing the Best Regulator Hose Length

The most common hose length found on the primary SCUBA regulator is about {28 to 30 in | 71 to 76 cm}. For many divers, this hose is too long and will cause the hose to "bow out," and create unnecessary drag and tug on the mouth. This makes for an uncomfortable dive, particularly in current. Some divers and even manufacturers attempt to improve the situation by making the hose even longer and perhaps adding a 360° swivel - which usually makes the problem even worse. Many of our our experienced divers choose the slightly shorter length of a {26 in | 66 cm} flex hose, feeling it is more comfortable with less drag and pull.

Increasingly we see our experienced single tank divers using a {40 in | 1 m} hose routed under their arm with the primary regulator on 90° swivel and use a shorter {22 in | 56 cm} hose for the backup regulator. The backup regulator is hung on a necklace directly below the chin. The { 40 in | 1 m } hose is also the common choice for the alternate regulator used on traditional sport diving "octopus" configurations. It is the most popular length for technical diving stage and deco regulators as well.

Many advanced divers and instructors believe the common hose lengths are too short in out-of-air situations and now use a much longer hose, often { 60 in | 1.5 m } for those who dive open water exclusively. Technical divers have adopted a length of { 84 in | 2.1 m } for overhead environments.

Conditions of Use    Privacy Notice   

© Copyright 2009 to 2018 Dive Gear Express®