Regulator Miflex XT-Tech Hose

As low as $45.95
In Stock
SKU
MF-MXTxx
Developed specifically for technical and professional divers, the XT-Tech series of diving hoses offers similar characteristics of the traditional rubber hose yet benefits of a braided flex hose.

Regulator Miflex XT-Tech Hose

XT-Tech Regulator Hose
Regulator Miflex XT-Tech Hose XT-Tech Regulator Hose
  • Similar characteristics of traditional rubber hose yet benefits of a braided flex hose
  • Smooth polyurethane outer surface reduces abrasion
  • Braided layer includes Kevlar┬« yarn reinforcement
  • Negative buoyancy - Lighter in weight than traditional rubber hoses
  • Fittings are marine grade nickel plated brass

The multi-layer design of the Miflex XT-Tech hose has a polyether based thermoplastic inner liner, fiber braiding of polyester & Kevlar® and an outer smooth layer of thermoplastic. The Miflex XT-Tech hose is negatively buoyant, allowing the hose when routed behind the neck to stay in place with less abrasion.

  • Inner lining is made from polyether based polyurethane
  • Braided layer includes Kevlar® yarn reinforcement
  • Smooth polyurethane outer surface reduces abrasion around the neck
  • Negative buoyancy allow the longer hoses to stay in place
  • Lighter in weight than traditional rubber hoses
  • Fittings are marine grade electroless nickel plated brass
  • 100% leak tested and produced on fully automated assembly lines

MIflex XT-Tech low-pressure regulator hoses are currently available in a limited number of lengths with standard 3/8-inch male first stage and 9/16-inch female second stage fittings. All Miflex hoses are certified to conform to the CE EN250 standard and Nitrox Ready. All Miflex XT-Tech hoses are supplied in re-usable drybag packaging, complete with manufacturers user and warranty information.

More Information
SKU MF-MXTxx
Weight (lbs) 0.5000
Brand DGX
There are no reviews yet Be the first to review this product
Only registered users can write reviews. Please, Sign in or create an account

Choosing the Best Regulator Hose Length

The most common hose length found on the primary SCUBA regulator is about {28 to 30 in | 71 to 76 cm}. For many divers, this hose is too long and will cause the hose to "bow out," and create unnecessary drag and tug on the mouth. This makes for an uncomfortable dive, particularly in current. Some divers and even manufacturers attempt to improve the situation by making the hose even longer and perhaps adding a 360° swivel - which usually makes the problem even worse. Many of our our experienced divers choose the slightly shorter length of a {26 in | 66 cm} flex hose, feeling it is more comfortable with less drag and pull.

Increasingly we see our experienced single tank divers using a {40 in | 1 m} hose routed under their arm with the primary regulator on 90° swivel and use a shorter {22 in | 56 cm} hose for the backup regulator. The backup regulator is hung on a necklace directly below the chin. The { 40 in | 1 m } hose is also the common choice for the alternate regulator used on traditional sport diving "octopus" configurations. It is the most popular length for technical diving stage and deco regulators as well.

Many advanced divers and instructors believe the common hose lengths are too short in out-of-air situations and now use a much longer hose, often { 60 in | 1.5 m } for those who dive open water exclusively. Technical divers have adopted a length of { 84 in | 2.1 m } for overhead environments.

About Us    Contact Us

Conditions of Use    Privacy Notice   

© Copyright 2009 to 2018 Dive Gear Express®
Message Icon