PSR-11-33-NM1 Oxygen Sensor

$75.00
Special Order
SKU
ADI-PSR-11-33-NM1
The PSR-11-33-NM1 Oxygen Sensor is used in some Biomarine and Steam Machines rebreathers.

Factory fresh, this oxygen sensor is never more than four months old when we ship to you. Due to the unique nature of the product, this diving grade oxygen sensor is NON-RETURNABLE. Your complete satisfaction is our goal, so please consider carefully before purchase.

PSR-11-33-NM1 Oxygen Sensor

Winchester 2-Pin Connector
Winchester 2-Pin Connector Front View Hydrophobic Membrane
  • Oxygen sensor with 2-pin Winchester connection
  • Accuracy within +/- 2% of full scale
  • Response time is 6 seconds
  • Used in some Biomarine and Steam Machine rebreathers

The Analytical Industries (AI) PSR-11-33-NM1 Oxygen Sensor, with a 2-pin Winchester connector, is used in some Biomarine MK15/MK15.5/CCR-1000 rebreathers, and some Steam Machines SM1000/SM1600 rebreathers, depending on the revision level of the electronics.

Features

  • Accuracy within +/- 2% of full scale
  • Response time is 6 seconds
  • Conformal coating
  • Temperature compensated
  • Hydrophobic membrane

AI brand diving sensors ship with the documentation of a final pressure test for each sensor. The sensor is tested at approximately one ATA in air and 100% oxygen, then tested again at 1.8 ATA in oxygen, and the millivolt readings are recorded for all measurements. The results document that the cell is within specifications for current and linearity up to a PO2 exceeding 1.6 ATA. The dated test results are included in the package with each individual sensor.

More Information
Brand Analytical Industries
SKU ADI-PSR-11-33-NM1
Weight 0.250000
Tek Tip Warning Image WARNING

Dive Gear Express has not done any verification or validation of rebreather oxygen sensors and disclaims any responsibility and liability for the use of oxygen sensors in rebreather applications. Verification and validation of specific oxygen sensors for use in rebreather applications is the responsibility of the equipment user and/or original equipment manufacturer.

Oxygen sensors are one of the very few items on our website that are NOT returnable, because we can't know with absolute certainty how they were handled once delivered. Additional shipping and handling of the return can also degrade performance. They are critical to safety in rebreather diving, and our customers have a reasonable expectation of receiving as factory fresh a product as possible from Dive Gear Express. Your complete satisfaction is our goal, so please consider carefully before purchase.





     
Message Icon