OMS Tribe Fins

As low as $159.00
In Stock
SKU
OMS-OM302TRB
The OMS Tribe Fins are made of a unique mix of materials using the highest quality rubber and provide strong solid propulsion with negative buoyancy.
Dive Gear Express will accept fins for return if you order the incorrect size. However, you will be responsible for return shipping costs. Return shipping costs on fins can be expensive because fins have a high 'dimensional weight'. Your complete satisfaction is our goal, so please consider carefully before purchase.

OMS Tribe Fins

Front and Back of Regular Size in Red
Front and Back of Regular Size in Red Size Comparison Available in Black or Red Color Foot Pocket Size Comparison New OMS Tribe Fin 720p
  • Unique mix of materials using 100% pure rubber
  • Spring heel straps with easy-grip loop around heel
  • Locking strap mounts for easy doffing and donning
  • 3 curved center blade vents for power, force and thrust
  • Round tip of fin and channels for kicking power and stability

The OMS Tribe fins are made of a unique mix of materials using the highest quality rubber and provide strong solid propulsion with negative buoyancy. Three curved vents in the center assist the power, force and thrust. The channels on the end of the fin increase power while maintaining stability and reduce stress while accelerating water over the blade. Large foot pockets integrated to the rails make this fin the best of its kind. Available in Black or Red color.

Fin Foot Pocket Dimensions

Fin Size Length
(Toe to Top)
Width
(Opening)
Height
(Opening)
Small {7.0 in | 18 cm} {4.0 in | 10 cm} {3.5 in | 9 cm}
Regular {7.5 in | 19 cm} {4.25 in | 11 cm} {3.5 in | 9 cm }
X Large {7.75 in | 20 cm} {4.5 in | 11 cm} {3.5 in | 9 cm}
XX Large {8.25 in | 21 cm} {5.25 in | 13 cm} {3.75 in | 10 cm}

NOTICE: Dive Gear Express always ships unused new fins, but all fin materials have some characteristics that upon close inspection can make new fins appear aged or used. By design, all fin materials are soft regardless of brand, so handing during manufacturing and shipping through various points of the supply chain will inevitably cause the appearance of some minor cosmetic scuffs. Some fin materials, especially rubber, also contain a mold release agent that exhibits a gradual "blooming" of a haze on the surface of the fin as it dries following manufacturing, giving the appearance of oxidation and aging. If the cosmetics are bothersome then they can be improved by scrubbing the surface with ordinary soap, water and a cloth.

More Information
Brand OMS
SKU OMS-OM302TRB
Weight 8.000000

What Size Fins Do I Need?

Unlike shoes, the question is difficult to answer with fins because a 'shoe' size is only part of the answer. The brand and type of neoprene bootie you wear, particularly if you wear heavy soled or rock boots, will have as much effect on the selection of fin foot pocket as the shoe size. Some people, especially those with high arches, prefer a loose fit in their fin and others prefer a snug fit. Fitting drysuit boots in the very large sizes is especially problematic.

There is no size standardization between brands of fins (or even between different models from the same brand) and so you cannot assume that a size in one brand of fin is the same dimensions as the size in another brand; even when the designs look very similar. Taking some actual measurements of your boot while on your foot and comparing to our foot pocket dimension charts will help determine the size selection for your desired fit.

Determine your correct size before you order! If you are not certain about your fin size then our recommendation is not to order until you can obtain that information. While Dive Gear Express will accept fins for return, you will be responsible for return shipping costs. Return shipping costs on fins can be expensive (especially from an International location) because fins are a relatively low priced item that has a high 'dimensional weight'. Your complete satisfaction is our goal, so please consider carefully before purchase.





     
Message Icon