Mares XR Harness w/Backplate

$219.00
In Stock
SKU
XR-41751x
The Mares XR Harness with back plate is a continuous webbing hogarthian style system with your choice of aluminum or stainless steel hardware, pre-assembled by the Mares factory on a Mares XR 3mm backplate.
Because the harness has been pre-assembled on the backplate, it will typically require some disassembly and reassembly to make final adjustments to fit specific individuals. Adding the XR Harness+Plate Padding Set to this pre-assembled package first requires almost complete disassembly. As such, many divers prefer to do the initial assembly of the harness on the plate themselves, ordering the backplate and harness only as individual items since the total price is the same.

Mares XR Harness w/Backplate

XR Harness with AL Backplate and Hardware
XR Harness with AL Backplate and Hardware XR Harness with S/S Backplate and Hardware XR Presents - Complete Harness System
  • XR Harness Pre-assembled on XR Backplate
  • Choice of Aluminum or Stainless Steel
  • Stainless version weighs approximately {3.2 lb | 1.5 kg} more than aluminum
  • Same total price as ordering individual plate and harness without assembly

The Mares XR Harness is a continuous webbing hogarthian style system, pre-assembled by the Mares factory on a Mares XR 3mm backplate in your choice of aluminum (anodized black finish) or 316 grade stainless steel (matte finish) hardware that includes:

  • Mares XR AL or 3mm S/S backplate
  • {11.5 ft | 3.5 m} continuous length of { 2 in | 51 mm} webbing harness with centered S/S grommet hole
    • 2 bent shoulder D-rings
    • 2 straight waist D-ring
    • 4 smooth 2-slot slides
    • 2 serrated 2-slot slides
    • 1 quick-release buckle, 316 grade stainless steel †
    • 4 sewn elastic bands, {1.5 in | 40 mm} long
  • { 4.9 ft | 1.5 m} length of { 2 in | 51 mm} webbing crotch strap
    • 1 straight D-ring sewn in to front webbing loop
    • 1 straight D-ring for rear
    • 1 smooth 2-slot slide

† The quick-release buckle is always 316 grade stainless steel with matte finish, even in the harness kit with aluminum hardware.

The black harness webbing is woven with the gray Mares XR logo. The crotch strap webbing has been updated to be slightly thinner more flexible than the harness webbing and does not have a logo. The black aluminum backplate and slides are silk-screened with the Mares XR logo. The stainless steel backplate, quick-release buckle and slides are brushed matte finish and stamped with the Mares XR logo. The aluminum D-rings are 5.0 mm thick and the stainless D-rings are 5.75 mm thick. The stainless version of the XR backplate plus harness hardware weighs approximately {3.2 lb | 1.5 kg} more than the aluminum version.

More Information
Brand Mares Extended Range
SKU XR-41751x
Weight 5.000000




     
Message Icon