Light Monkey Glue-On Thigh Pocket

In Stock
The very large Light Monkey Glue-On Thigh Pocket has a neoprene back that can be glued on to a wetsuit or drysuit.
Please note that the pocket does not include adhesive. Aquaseal neoprene adhesive may be ordered separately, or for exposure suits made of tri-laminate or vulcanized rubber you should use G-dive liquid toluene based adhesive.

Light Monkey Glue-On Thigh Pocket

Light Monkey Glue-On Thigh Pocket
Light Monkey Glue-On Thigh Pocket Light Monkey Glue-On Thigh Pocket
  • Durable Nylon material with Neoprene back
  • Two external quick access pockets
  • Dimensions {12.5 in high x 8.25 in wide}
  • Inside is a lanyard plus D-ring to clip off items
  • Stainless drain grommets on the bottom

This oversized thigh pocket includes two external quick access pockets, a small one on the outside of the flap for objects such as arrows and cookies, and a slot behind the main pocket for quick access to tables or wetnotes. Inside the bellows pocket is both a lanyard plus a large D-ring to clip off reels and pocket lights. The pocket includes a special raised tab on the edge of the velcro closure to make it easy to grab and open the pocket flap, even with heavy gloves, along with stainless drain grommets on the bottom.

The pocket is { 12.5 in high x 8.25 in wide | 31.75 cm high x 20.9 cm wide } and the internal depth expands from { 0.5 in to 2 in | 1.3 cm to 5.1 cm wide }. Some customers have expressed surprise at the generous size of this pocket, about the size of a piece of letter paper.

More Information
SKU LM-35.100.100
Brand Light Monkey
Weight 0.4000
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

How to Glue On Your Glue-On Pocket

Don't even think about trying to guess where to position the pocket, you have very little chance of getting even close. Take the time to put your exposure suit and your BCD on, then mark exactly where you want your pocket. The preferred location would be directly underneath and slightly above where your hand falls naturally on your thigh such that your fingers can reach completely into the bottom of the pocket. Some sidemount divers are now placing the pocket on the back of their thigh.

After marking the location, remove your exposure suit, lay it flat and prepare to attach the pocket using an adhesive. For exposure suits made of tri-laminate or vulcanized rubber you should use G-glue. For G-glue, use the applicator brush to evenly apply the contents of a 1.0 ounce bottle of G-glue directly from the bottle on to the back of the pocket. If your suit is neoprene, then you can use Aquaseal. For Aquaseal, using a disposable plastic knife like those found in fast food restaurants or similar instrument, evenly spread an entire 0.75 ounce tube of Aquaseal directly from the tube on to the back of the pocket.

Once the adhesive is applied, carefully place the pocket on to the exposure suit according to your markings. Put some weights, like a large stack of books, on the entire pocket. Allow it to cure for at least 24 hours, 48 is better, and resist the temptation to 'check on it'. It will be permanently attached to your exposure suit, as in you won't ever get it off again.


© Copyright 2009 to 2019 Dive Gear Express®
Message Icon
Message Icon