High Pressure Miflex2 HD Carbon Hose

Rating:
100% of 100
$45.00
In Stock
SKU
MF-MHPxx-CN
The Miflex2 HD Carbon high pressure hose is a third thinner and much more flexible when compared to rubber hose.

High Pressure Miflex2 HD Carbon Hose

High Pressure Miflex2
High Pressure Miflex2
  • Double-braiding resists snags and abrasions
  • Kink resistant Kevlar blend - chromed brass fittings
  • Unique "shock absorbers" for impact resistance
  • Ultra THIN diameter - UV resistant - Nitrox Ready
  • 7/16-inch male to 1st stage - 7/16-inch female to SPG

The Miflex2 HD Carbon high pressure hose is a third thinner and much more flexible when compared to rubber hose. This version offers increased impact resistance, with specially developed shock absorbers fitted during manufacture to each end of the hose. This improves accidental impact resistance plus acts as a centering sleeve in consoles and boots. The extreme performance double braided flex SCUBA hoses manufactured by Miflex2™ are subjected to more than 30 individual performance and safety automated tests. All Miflex2 high pressure SCUBA hoses have chromed brass fittings and are certified to conform to the EN 250 standard with an exceptional burst pressure rating of {29000 PSI | 2000 BAR}. All these HP hoses are Nitrox Ready.

The typical HP hose is a 7/16-inch male at the end that screws into the first stage HP port and a 7/16-inch female swivel at the end that screws on to the SPG. Our most popular HP hoses are {24 in | 61 cm} long for doubles, {26 in | 66 cm} long for singles, and {30 in | 76 cm} long for consoles.

All high pressure hoses use an 'air spool' with two tiny o-rings to mate the swivel connector on the hose to the fitting on the gauge. With a worn or missing air spool, any HP hose will LEAK at the swivel. The air spool is not included with the hose but we recommend replacing the air spool when replacing the hose. The standard spool has the flange in the center as pictured but a few SPGs, typically the plastic body ones, may only accept a spool without a shoulder in which case you will have to reuse the air spool from the SPG.

More Information
SKU MF-MHPxx-CN
Weight (lbs) 0.2000
Brand Miflex2
Customer Reviews
Most Helpful Customer Reviews
  1. 1 person found the following review helpful
    Great upgrade

    By

    on

    Good quality, more flexible than a previous braided high pressure hose. These make a nice upgrade from the stiff rubber hoses supplied with most gauges and are an improvement over other brands of braided hoses. Somewhat pricey, but worth the extra money.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  2. 1 person found the following review helpful
    All Good....

    By

    on

    very fast delivery
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  3. 1 person found the following review helpful
    0

    By

    on

    0
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  4. 1 person found the following review helpful
    Fast shipping. Thanks

    By

    on

    Fast shipping. Thanks
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  5. 1 person found the following review helpful
    Good deal

    By

    on

    Nice to have smaller diameter hp hoses these are a good deal for the price.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
See all 10 reviews
Post a comment as
Only registered users can write comments. Please, Sign in or create an account
Only registered users can write reviews. Please, Sign in or create an account
Tek Tip Warning Image WARNING

Keep in mind that all SCUBA hoses will fail sooner or later either due to age, storage conditions or handling. Scuba hoses, regardless of brand and materials, require some minimal care. Do not allow hoses to receive prolonged exposure sunlight, as the heat and UV from strong sunlight will significantly shorten the life of the hose. Do not attempt to flush the inside of the hose with any form of solvent or other chemical, new hoses are factory clean and if you have any reason to think they are no longer clean then the hose should be replaced. Prior to every dive trip you should always pressurize and inspect your hoses for mechanical damage, corroded fittings, bulges and leaks. Dive Gear Express suggests replacing all SCUBA hoses every five years or 500 dives, whichever comes first.

Choosing the Best Primary SPG Hose Length

For most recreational divers, the common high-pressure hose length of { 32 in | 81.3 cm } is long enough to be run under the left arm, across the chest and clipped off on the right shoulder D-ring. A few divers with a large chest, or who like to hold their instruments well out from their body when reading, require a longer hose length of { 42 in | 106.7 cm }. Some recreational divers seeking very streamlined configurations are routing their HP hose with a compact SPG over their left shoulder in the same manner they route their BC hose and those divers are using HP hose lengths as short as { 24 in | 61 cm } and even { 21 in | 53.3 cm }.

Technical divers almost always carry a standalone SPG clipped off to the left waist D-ring. For use with double cylinder configurations, the typical HP hose length is { 24 in | 61 cm }, although some divers find that length slightly too short. It's almost always too short when used with a single cylinder configuration. Many divers clipping to their waist D-ring find a HP hose length of { 26 in | 66 cm } to work well with both singles and doubles. Cave and wreck divers also remove the SPG boot for the same reason they remove the cylinder boot, because the boot surfaces have been known to ratchet divers into tight spots, making extraction difficult.

About Us    Contact Us

Conditions of Use    Privacy Notice   

© Copyright 2009 to 2018 Dive Gear Express®
Message Icon