G-Dive G-Glue Contact Adhesive, 32oz Can

$75.00
In Stock
SKU
GDI-G-Glue32H
G-Glue is a liquid adhesive, black in color, recommended for use on rubber and tri-laminate composition drysuits.
For professional use only. Due to hazmat shipping restrictions, this product ships separately and individually, directly from G-Dive, for an additional $17.50 each. It will ship UPS Ground only, to the contiguous 48 states.

G-Dive G-Glue Contact Adhesive, 32oz Can

G-Dive G-Glue Contact Adhesive, 32oz Can
G-Dive G-Glue Contact Adhesive, 32oz Can

Suggested application method:

  • Use sandpaper or abrasive to open surface of the material.
  • Prior to application of glue, clean surfaces with acetone.
  • Apply glue to both surfaces in a very thin layer.
  • Glue can be diluted with acetone to make it more liquid.
  • Let both parts dry slightly until surface is not wet any more.
  • Press the parts together and maintain constant pressure while curing.
  • Allow time to cure for minimum of 12 hours before use.

NOTE: This is an excellent adhesive for drysuit seals and seam tape.

If you are trying to glue a pocket onto a wetsuit or drysuit we suggest the Aquaseal adhesive that provides a thicker solution for better results.

More Information
SKU GDI-G-Glue32H
Brand G-Dive
Weight 2.3000
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Tek Tip Warning Image WARNING

WARNING: HIGHLY FLAMMABLE - Read and Understand the MSDS before use.
Contains: TOLUENE 40 to 50 % N-HEPTANE 10 to 20 % ACETONE 10 to 20 %

California WARNING: Using this product will expose you to toluene, a chemical known to the State of California to cause birth defects or other reproductive harm. More information at www.P65Warnings.ca.gov

Read and understand MSDS before use.



     

© Copyright 2009 to 2019 Dive Gear Express®
Message Icon
Message Icon