DGX Custom - Nylon Webbing with Grommet(s)

As low as $5.00
In Stock
SKU
DX-2010xx-G
Marine grade nylon webbing sold in increments of one foot - {1 ft | 30.5 cm} and choice of three widths with one or more marine grade stainless steel grommets custom installed in the webbing.

Maximum 140 characters

You will need to describe where you want the grommet(s), for example the most common instruction for one grommet is: "Centered in length". Another example for five grommets is: "1-inch apart starting 6-inches from end." If you have a complex requirement, write "See drawing in separate email" and reply to your order confirmation email with an attached drawing.

DGX Custom - Nylon Webbing with Grommet(s)

2-inch webbing with a grommet installed
2-inch webbing with a grommet installed
  • Rot-proof, waterproof, resistant to mold, mildew and UV - suitable for marine applications
  • Marine Grade 304 Stainless Steel #3 grommet installed per your instructions
  • Grommets priced per each installed along length of webbing
  • Webbing sold in increments of one foot - {1 ft | 30.5 cm}
  • Grommets positioned on webbing with tolerance ±1 inch

You may order one or more marine grade stainless steel grommets installed in the webbing. The grommets are ordered each and the webbing is ordered in units of {1 ft | 30 cm}, shipped as one continuous length. Grommets are installed according to your instructions. Measurements for grommet positions along the webbing length are approximately from the center of the grommet hole with tolerance ±1-inch. Grommets are always installed centered on the webbing width.

Our webbing is rot-proof, waterproof, and resistant to mold, mildew and UV. It is suitable for marine applications. The { 2 in | 5 cm } nylon webbing is the typical thickness, well suited for use in backplate harness rigging and general-purpose diving applications. The { 1.5 in | 3.8 cm } and { 1 in | 2.5 cm } nylon webbing is used for various straps.

The grommet is a rolled rim size #3 with a hole size of approximately 1/2-inch and an outside diameter of approximately 1-inch. This is not a nickle plated brass self-piercing grommet typically used for fashion accessories, our DGX Custom grommet is a marine grade 304 stainless steel two piece grommet set that will be installed using a bespoke professional bench press tool.

More Information
Brand DGX
SKU DX-2010xx-G
Weight 0.100000




     
Message Icon