Dive Rite Stainless Steel Braided HP Hose, 6-Inch

$42.00
In Stock
SKU
DR-HSHP6

Dive Rite's Stainless Steel Braided HP Hose is a rugged alternative to traditional rubber and nylon braided HP hoses. Its braided stainless outer sheath protects the inner nylon tube.

The Stainless Steel Braided HP Hose is ideal for heavy use applications such as sidemount and stage bottles.

Dive Rite Stainless Steel Braided HP Hose, 6-Inch

Dive Rite Stainless Steel Braided HP Hose, 6-Inch
Dive Rite Stainless Steel Braided HP Hose, 6-Inch
  • Rugged alternative to traditional rubber and nylon braided HP hoses
  • Braided stainless outer sheath protects the inner nylon tube
  • Ideal for heavy use applications in extreme environments
  • Compact 6-inch length perfect for sidemount and stage bottles
  • 7/16-inch male to 1st stage - 7/16-inch female to SPG - Hose is Nitrox Ready

Dive Rite's Stainless Steel Braided HP Hose is a rugged alternative to traditional rubber and nylon braided HP hoses. Its braided stainless outer sheath protects the inner nylon tube. The typical HP hose is a 7/16-inch male at the end that screws into the first stage HP port and a 7/16-inch female swivel at the end that screws on to the SPG. High-pressure flex SCUBA hoses have chromed brass fittings and are designed to conform to the EN 250:2014 standard with a maximum working pressure of {5000 psi | 350 bar} and a burst pressure rating of {20000 PSI | 1379 BAR}. All these HP hoses are Nitrox Ready. The Stainless Steel Braided HP Hose is ideal for heavy use applications such as side mount and stage bottles.

  • Weight: 2.1 ounces (60 grams)
  • ID= 3.5mm OD= 8mm
  • Working Pressure is 5,000 PSI, Burst Pressure 20,000 PSI
  • Male thread is 7/16

All high-pressure hoses use an 'air spool' with two tiny o-rings to mate the swivel connector on the hose to the fitting on the gauge. With a worn or missing air spool, any HP hose will LEAK at the swivel. The air spool is not included with the hose but we recommend replacing the air spool when replacing the hose.

More Information
SKU DR-HSHP6
Weight 0.210000
Brand Dive Rite
Tek Tip Warning Image WARNING

Keep in mind that all hoses will fail sooner or later either due to age, storage conditions or handling. Scuba hoses, regardless of brand and materials, require some minimal care. Do not allow hoses to receive prolonged exposure sunlight, as the heat and UV from strong sunlight will significantly shorten the life of the hose. Do not attempt to flush the inside of the hose with any form of solvent or other chemical, new hoses are factory clean and if you have any reason to think they are no longer clean then the hose should be replaced. Prior to every dive trip you should always pressurize and inspect your hoses for mechanical damage, corroded fittings, bulges and leaks. Dive Gear Express suggests replacing all SCUBA regulator hoses every five years of service or 500 dives, whichever comes first.





     
Message Icon
Message Icon