DGX Insert (O2) 200-BAR DIN to Yoke, Brass

In Stock
Use this Oxygen compatible insert to convert our DGX Premium O2 valves 200-BAR DIN style SCUBA cylinder valve for use with a yoke style first stage regulator.

WE WANT TO PROPERLY SET YOUR EXPECTATIONS: The threads on these oxygen compatible valve outlet inserts are oxygen clean copper metal alloy (aka "brass") which exhibit some discoloration that is NOT aesthetically pleasing as chromed brass finishes typical of most SCUBA valves.

DGX Insert (O2) 200-BAR DIN to Yoke, Brass

DGX Insert (O2) 200-BAR DIN to Yoke, Brass
DGX Insert (O2) 200-BAR DIN to Yoke, Brass
  • Oxygen compatible and clean
  • Easily converts a DIN valve opening to Yoke
  • Use on 200-Bar style (Pro DIN/K) valves only
  • Has 8-mm hex opening and two O-rings
  • Made of oxygen clean copper metal alloy (aka "brass")
More Information
SKU DX-702282-O2
Brand DGX
Weight (lbs) 0.0750
There are no reviews yet Be the first to review this product
Only registered users can write reviews. Please, Sign in or create an account
Tek Tip Warning Image WARNING
According to our suppliers, these products are constructed with oxygen compatible materials and factory cleaned for use with compressed gases in excess of 23.5% oxygen. Nonetheless, the 'clean state' of this equipment applies only prior to initial use. Thereafter, periodic inspection and cleaning are a necessity. You must meticulously follow the recommendations of the US Department of Transportation (DOT), Compressed Gas Association (CGA), and other federal/state/local agencies, plus your dive training agency for equipment maintenance, handling, storage, labeling, filling, transport and use of compressed gases. Oxygen-related fires and explosions can result in serious injury or death. Ultimately, you must make the final decision to assume all risks associated with the use of any compressed gases, including those in excess of 23.5% oxygen.

How are the DGX Premium O2 Valves different from regular SCUBA valves?

The most common technical objections to the use of ordinary SCUBA valves with pure oxygen are: (1) too rapid a speed of opening and (2) chrome plating of the surfaces in contact with high pressure oxygen that are subject to friction or impact. The DGX Premium O2 valves are designed to answer these two specific objections, but are otherwise similar to the other Nitrox Ready SCUBA tank valves we sell.

The DGX Premium O2 valve seat & plug assembly has finer threads, making the initial opening action of the valve more gradual and requiring several more turns to fully open than the standard SCUBA valve. The DGX Premium O2 valves are a copper metal alloy body with inlet and outlet threads, modular port threads and port plug, seat & plug assembly, dip tube, burst disk assembly and optional DIN-to-Yoke screw-in adapters that are not chrome plated. Just to be clear, all the SCUBA tank valves sold by Dive Gear Express incorporate oxygen compatible materials including fluorocarbon o-rings, and are oxygen cleaned by the factory. The DGX Premium O2 valves are not any more so in those characteristics than any other SCUBA tank valves we sell.

Can I use the DGX Premium O2 valves with pure oxygen? Yes and no; this simple question has a complex answer because there is no widely recognized scuba diving standard for what constitutes suitability for oxygen service. The reason why we can't give you a simple unqualified "YES" is related to the associated risks when the circumstances of use are completely outside our control. To dive using oxygen requires you to make an informed decision to accept for yourself the risks of handing the oxygen. For more information please read About Oxygen Disclaimers.

Conditions of Use    Privacy Notice   

© Copyright 2009 to 2018 Dive Gear Express®