DGX Insert 200-BAR DIN to Yoke
- Easily converts a DIN valve opening to Yoke
- Use on 200-Bar style (Pro DIN/K) valves only
- Has 8-mm hex opening and two O-rings
- Nitrox Ready - Chromed Brass Construction
Most Helpful Customer Reviews
1 person found the following review helpfulWorks as expected
on 16 January, 2019Note 8-mm hex. Works as expected. No signs of excessive wear.
1 person found the following review helpfulNice inserts at a very good price!!!
on 29 December, 2018The threads are perfect, but the insert length seems to fit the XS Scuba valve better than the Blue steel valve. The XS Scuba insert is 15.6mm long, as is this insert, while the Blue Steel insert that comes with the tank was 14.6mm long. And the hex wrench size is 1/4" and not 8mm....at least on the one's I have. And the Blue Steel inserts that come with the tanks are 6mm and not 8mm.
1 person found the following review helpfulJust what I needed
on 14 October, 2018It is very common that these inserts are lost when we move from yoke to din, this insert DGX efficiently meets as a replacement insert as in my case, is very good construction and finishing.
1 person found the following review helpfulInsert - DIN to Yoke
on 24 September, 2018The convertible valve and its insert? The greatest invention in the history of SCUBA. Why not, it just works.
1 person found the following review helpfulDGX Insert 200-BAR DIN to Yoke
on 1 May, 2018High quality parts at a reasonable price. Thanks DGX.