DGX Trim Weight Pocket (each)

Rating:
89% of 100
Loading...
$10.00
In Stock
SKU
DX-101003
The DGX Gears Trim Weight Pocket is compact and works equally well on a waist band or tank strap.

DGX Trim Weight Pocket (each)

DGX Gears Trim Weight Pocket
DGX Gears Trim Weight Pocket DGX Gears Trim Weight Pocket Mounted on Webbing DGX Gears Trim Weight Pocket - Back
  • Designed to hold one { 2, 3 or 4 lb } block weight
  • Made from Cordura with Velcro closure and tab
  • Mounts to any { 2 in | 5 cm } webbing
  • Square shaped { 3.25 x 3.25 in }
  • Stainless steel grommet on bottom for drainage

Made from Cordura with Velcro closure and tab, the DGX Trim Weight Pocket is specifically designed to hold one { 2, 3 or 4 lb | 0.9, 1.3 or 1.8 kg } block weight, or small soft weights. The pocket is square shaped with dimensions of { 3.25 x 3.25 in | 8.25 x 8.25 cm }. A stainless steel grommet at the bottom provides drainage. Two { 1 in | 2.5 cm } nylon webbing strips along the back provide a secure fit on any { 2 in | 5 cm } webbing. Mounted sideways at the waist, when the pocket is opened the weight may be easily removed. The pocket is also ideal for attaching trim weight to cylinders. Use a {2 in | 5.1 cm} belt slide or webbing lock to secure the pocket if you please (NOT Included).

DGX Trim Weight Pockets are sold individually. Order two if you need a pair.

More Information
SKU DX-101003
Brand DGX
Weight (lbs) 0.0700
Customer Reviews
Most Helpful Customer Reviews
  1. DGX trim weight pocket (pair)

    By

    on

    Bought these to save $$ on weight pockets, eliminate weight belt on my tec set up, and integrate the weights onto a harness. Works great.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  2. loop reorientation

    By

    on

    The belt loops need to rotate 90 degrees
    they are oriented opposite of what I'd think they should be.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  3. Use it to trim my

    By

    on

    Use it to trim my BP/W setup... good build quality and easy to set
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  4. Good looking, high quality

    By

    on

    Just what I needed!
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  5. Great pockets!!

    By

    on

    Got these pockets to go on my cam bands on my BCD. I am more than happy with the quality of the pockets and the workmanship. They hold 4lb hard weights, even though it says 5lbs will fit. They are nice an compact and do not have a bunch of extra material. I would recommend these pockets! Thanks DRIS!
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
See all 7 reviews
Post a comment as
Only registered users can write comments. Please, Sign in or create an account
Only registered users can write reviews. Please, Sign in or create an account

Get the Lead Out!

Adding weight is rarely the solution to a trim problem. In many cases, just removing excess weight from the waist belt will reduce the size of the compensating gas bubble and is often a better approach to adjusting trim. However, sometimes the amount of weight is correct but it needs to be redistributed to correct a trim problem, particularly if aluminum cylinders or drysuits are involved. Proceed cautiously and try to remove weight somewhere else when adding a trim weight because in many cases the diver already has too much weight and adding weight, even trim weight, just makes the problem worse.



Conditions of Use    Privacy Notice   

© Copyright 2009 to 2018 Dive Gear Express®