DGX Gears S1 Singles Wing

$199.00
In Stock
SKU
DX-202030
Featuring a narrow low profile donut design with a lift capacity of { 30 lb | 13.6 kg }, the DGX Gears S1 Single Tank Wing is a perfect fit for AL80 / LP80 / LP85 / HP100 cylinders and it can be matched with any standard metal backplate and webbing harness.

DGX Gears S1 Singles Wing

Front View
Front View Back View Integrated Roll Control Opening Along Center Spine Allows Options for Strap Placement
  • Low profile donut design with a lift capacity of { 30 lb | 13.6 kg }
  • 1000 Denier nylon outer shell with urethane coated 200 Denier laminated bladder
  • Incorporates integrated roll control pads for tank stability
  • Includes pull-to-dump remote exhaust and a { 16 in | 40.6 cm } corrugated hose
  • Perfect fit for AL80 / LP80 / LP85 or HP100 size cylinders

Featuring a narrow low profile design with a lift capacity of { 30 lb | 13.6 kg }, the DGX Gears S1 Single Tank Wing is a perfect fit for AL80 / LP80 / LP85 / HP100 cylinders and it can be matched with any standard metal backplate and webbing harness. The two tank strap slot design allows for a more secure tank attachment option of using two (2) cam straps (straps not included). It is constructed from durable 1000 Denier nylon outer shell material and further enhanced with an internal heavy-duty urethane coated 200 Denier nylon laminated bladder.

With four (4) stainless steel grommets along the center spine in standard { 11 in | 27.9 cm } on center spacing it will allow for multiple buoyancy positioning options when used with a metal backplate. The internal center spine (touching the tank) also incorporates integrated roll control pads that further align the cylinder in the proper position and eliminate the need for a single tank adaptor. The elongated streamlined design evenly disperses the lift around your cylinder for a balanced configuration with zero possibility of a "taco effect."

The DGX Gears S1 Wing comes standard with a pull-to-dump remote exhaust elbow and a { 16 in | 40.6 cm } corrugated hose. It does NOT include a BC inflator hose but we suggest a { 22 in | 56 cm } option for use with the included corrugated hose assembly. The easy pull dump OPV is located on the inside of the lower section of the wing on the diver's left side for easy use when in proper trim position in the water. In a vertical position the pull dump corrugated hose may be used for buoyancy control on descent and ascent as needed. The small DGX Gears logo is placed on the upper inside of the wing.

Actual wing weight with fittings is { 2.10 lbs | 0.9 kgs }

Approximate dimensions of wing when inflated: { 23 in H x 13 in W | 58 cm x 33 cm }

More Information
SKU DX-202030
Weight 3.000000
Brand DGX




     
Message Icon
Message Icon