DGX Gears D1 Doubles Wing

$299.00
In Stock
SKU
DX-202055
The { 55 lb | 24.9 kg } DGX Gears D1 Doubles Wing features an inner bladder in a 360 degree design.

DGX Gears D1 Doubles Wing

Front View
Front View Back View Highest Backplate Position Lowest Backplate Position
  • Low profile 360 degree design with a lift capacity of { 55 lb | 25 kg }
  • 1000 Denier nylon outer shell with urethane coated 200 Denier laminated bladder
  • Includes plain elbow exhaust and a { 12 in | 30.5 cm } corrugated hose
  • Works with any standard metal backplate and webbing harness

The { 55 lb | 24.9 kg } DGX Gears D1 Doubles Wing features an inner bladder in a 360 degree design. The 360 design allows for a very streamlined profile, with better trim and buoyancy characteristics than the older horseshoe designs, resulting in less drag and less energy expended when swimming. It is constructed from durable 1000 Denier nylon outer shell material and further enhanced with an internal heavy-duty urethane coated 200 Denier nylon laminated bladder.

It can be matched with any standard metal backplate and webbing harness. With six (6) stainless steel grommets along the center spine in standard { 11 in | 27.9 cm } on center spacing it will allow for multiple buoyancy positioning options when used with a metal backplate.

The DGX D1 Wing comes standard with a plain elbow and a { 12 in | 30.5 cm } corrugated hose. It does NOT include a BC inflator hose but we suggest a { 15 in | 38 cm } option for use with the included corrugated hose assembly. The easy pull dump OPV is located on the inside of the lower section of the wing on the diver's left side for easy use when in proper trim position in the water. The small DGX Gears logo is placed on the upper inside of the wing.

Actual wing weight with fittings is { 3.44 lbs | 1.56 kgs }

Approximate dimensions of wing when inflated: { 23 in H x 23 in W | 58 cm x 58 cm }

More Information
SKU DX-202055
Weight 5.000000
Brand DGX




     
Message Icon
Message Icon