A ready-to-dive backplate/wing/harness package for single tank diving using factory fresh Mares XR components. This fully integrated BCD is configured with your choices for the Mares XR Single Tank donut aircell together with a Mares XR soft backplate, Mares XR webbing harness w/crotch strap and hardware, and includes DGX Gears tank straps.

Included with this Package:

• Mares XR Single Tank Wing, Choice of {22 lb |10 kg} or {34 lb | 16 kg}
• Mares XR Soft Backplate
• Mares XR Harness w/Crotch Strap, Aluminum Hardware
• DGX Tank Straps (Qty 2) w/ stainless steel cam buckles
• DGX Plastic Assembly Screws (2)

The {22 lb |10 kg} wing can accommodate the typical Aluminum 80 and steel HP-80 tanks. The {34 lb | 16 kg} wing is ideal for diving larger single tanks with a deco or bailout bottle or in a cold water environment where extra ballast weight is used. The XR single tank wing features a narrow low profile donut design and includes a { 16 in | 41 cm } corrugated hose with plain elbow along with a {23 in | 58 cm} rubber low-pressure BC hose along with a {23 in | 58 cm} rubber low-pressure BC hose. Weight of harness & larger wing with soft backplate is less than { 5 lb | 2.3 kg }.

The Mares XR Single Tank Wing is designed to be assembled on the Mares XR soft backplate without the use of a single tank adapter. Using the straps threaded through the backplate snugs the tank and wing up very tight against the backplate and does not allow the tank to rock. The two tank strap slot design allows for a more secure tank attachment using the included two (2) cam straps.

When you order this package, please keep in mind that this harness does NOT come assembled to the backplate for you, as your personal sizing for the harness must be done during assembly. The aircell and pockets will also be separate for shipping but are easily attached once you are ready to dive. All of the XR components are the most current factory fresh versions from Mares.