DGX Custom - SPG and Flex Hose Assembly in PSI

Rating:
94% of 100
As low as $70.95
In Stock
SKU
DX-706001
Build your own custom SPG and Flex Hose Assembly in PSI
LOOK CLOSELY! A common mistake is ordering the wrong SPG, especially PSI or BAR.

DGX Custom - SPG and Flex Hose Assembly in PSI

SPG Options in PSI
SPG Options in PSI SPG Size Options - Side View Glowing in the Dark Medium SPG with Visible Internals Inside Premium SPG Thin SPG with Visible Internals Inside a Thin SPG Leaking SPG Spool Replacement

Many experienced divers feel instrument consoles make frequent monitoring of depth/time/deco status too inconvenient and add unnecessary bulk. They prefer to use a standalone SPG and wrist mount most of their other instruments. Order our premium quality naked SPG with spool that includes oxygen compatible o-rings, and our premium quality high pressure flex hose with everything configured exactly as you want and we will assemble it for you. Length is measured in inches, from end to end of hose, including the fittings and their threads but does not include the length of the SPG.

  • Thin { 1.75 in | 4.5 cm } diameter with { 1.5 in | 3.8 cm } face
  • Large { 2.375 in | 6 cm } diameter with { 2 in | 5.1 cm } face
  • Medium { 2 in | 5 cm } diameter with { 1.75 in | 4.5 cm } face
More Information
SKU DX-706001
Weight 0.5000
Brand DGX
Customer Reviews
Most Helpful Customer Reviews
  1. Great SPG Assembly

    By Joseph B.

    on 12 July, 2019

    Great SPG assembly! Works perfectly at a great price. Be aware it does not come with a boot so you'll need to pick one of those up if you think you need one.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  2. DGX Custom - SPG and Flex Hose Assembly in PSI

    By Barry K.

    on 16 January, 2019

    I own several of these SPG's, and purchased this one as a spare. I would not have purchased it were I not satisfied with the ones that I' already own. A tip though, I stock up on spare spools as they are the most likely source of any problems. The spools that DGX sells are shipped with piton O-rings, and cost less than $2.00 apiece. Much easier and faster to just replace the spool thank diddle with tiny O-rings.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  3. SPG

    By Jason C.

    on 8 August, 2018

    Great SPG for back mount setup and good hose length.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  4. Awesome Gauges

    By Michael U.

    on 5 August, 2018

    As always great gear from DGX. Highly viable white faces, superb quality. These guys rock!
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
  5. DGX- SPG and Flex Hose Assy. PSI

    By Barry L.

    on 1 August, 2018

    Well worth the effort and expense to switch from useless button gauges.
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
See all 33 reviews
Post a comment
as
Only registered users can write comments. Please, Sign in or create an account
Only registered users can write reviews. Please, Sign in or create an account

Choosing the Best Primary SPG Hose Length

For most recreational divers, the common high-pressure hose length of { 32 in | 81.3 cm } is long enough to be run under the left arm, across the chest and clipped off on the right shoulder D-ring. A few divers with a large chest, or who like to hold their instruments well out from their body when reading, require a longer hose length of { 42 in | 106.7 cm }. Some recreational divers seeking very streamlined configurations are routing their HP hose with a compact SPG over their left shoulder in the same manner they route their BC hose and those divers are using HP hose lengths as short as { 24 in | 61 cm } and even { 21 in | 53.3 cm }.

Technical divers almost always carry a standalone SPG clipped off to the left waist D-ring. For use with double cylinder configurations, the typical HP hose length is { 24 in | 61 cm }, although some divers find that length slightly too short. It's almost always too short when used with a single cylinder configuration. Many divers clipping to their waist D-ring find a HP hose length of { 26 in | 66 cm } to work well with both singles and doubles. Cave and wreck divers also remove the SPG boot for the same reason they remove the cylinder boot, because the boot surfaces have been known to ratchet divers into tight spots, making extraction difficult.



     

© Copyright 2009 to 2019 Dive Gear Express®
Message Icon
Message Icon