DGX Custom - Poseidon Cyklon Stage Reg Package

$849.00
In Stock
SKU
PK-782501
The DGX Custom - Poseidon Cyklon Stage Reg Package offers maximum hose routing flexibility for an ultra high performance stage and deco bottle regulator package

DGX Custom - Poseidon Cyklon Stage Reg Package

DGX Custom - Poseidon Cyklon Stage Reg Package
DGX Custom - Poseidon Cyklon Stage Reg Package DGX Custom - Poseidon Cyklon Stage Reg Package DGX Custom - Poseidon Cyklon Stage Reg Package DGX Custom - Poseidon Cyklon Stage Reg Package
  • Complete stage bottle regulator configuration
  • Assembled, tested and shipped to you ready-to-dive
  • Choose Flex or Rubber hoses and Color preference
  • Includes Thin SPG with {6 in | 15 cm} HP hose
  • Cold Water and Nitrox Ready

The ambidextrous Poseidon Cyklon offers maximum hose routing flexibility for an ultra high performance stage and deco bottle regulator package incorporating a piston design first stage. The version from Dive Gear Express comes assembled and includes:

  • One Poseidon Cyklon First and Second Stages
  • { 47 in | 1200 mm } LP hose in black color
  • Thin SPG with {6 in | 15 cm} HP hose
  • S/S Bolt Snap & Delrin DIN Cap

The Cyklon is CE certified to EN250 European standards.

The Poseidon Cyklon second stage uses a unique fitting size that is NOT compatible with standard LP flex or rubber hoses.

Visit our Poseidon Cyklon Regulators page for more information on the Cyklon regulators.

More Information
SKU PK-782501
Weight (lbs) 5.0000
Brand Poseidon
There are no reviews yet Be the first to review this product
Only registered users can write reviews. Please, Sign in or create an account
Tek Tip Warning Image WARNING

Because of the history behind the Cyklon model second stage, there is a compatibility issue with modern standard hoses. The second stage 9/16-inch male fitting that accepts the female fitting on the hose will just barely seal with the #10 o-ring in the barrel of the hose fitting. It WILL seal, but if you pull hard on the hose at various angles you can usually find a position that will cause a slight 'fizz' of tiny bubbles at the fitting. We have tried the standard regulator hoses from a variety of suppliers and all seem to exhibit the issue to some degree with Cyklon model second stages. Dive Gear Express also offers third party hose adapters that allow our standard low-pressure rubber and flex hoses to be used with any Cyklon model second stage.

If you substitute a standard hose without an adapter, do NOT use undue force to over-tighten the hose fitting in an attempt to address this behavior. The second stage cracking pressure adjustment screw extends out in to the barrel of the fitting more than most second stage designs, and over-tightening will cause the hose fitting to bottom out against the end of the adjustment screw. This results in the second stage no longer being able to swivel on the hose, and possibly causes the cracking pressure adjustment to change as well.

Poseidon USA advises us that they are aware of this behavior, limited exclusively to Cyklon model second stages, and to address this issue they offer Cyklon specific OEM heavy rubber hoses. Dive Gear Express offers Cyklon specific OEM hoses in the only lengths available from Poseidon.

About Us    Contact Us

Conditions of Use    Privacy Notice   

© Copyright 2009 to 2018 Dive Gear Express®
Message Icon