DGX Custom - Poseidon Cyklon Single Tank Reg Package

$999.00
In Stock
SKU
PK-781006
The DGX Custom - Poseidon Cyklon Single Tank Reg Package contains everything needed for a high performance regulator setup in a single tank long hose configuration

DGX Custom - Poseidon Cyklon Single Tank Reg Package

DGX Custom - Poseidon Cyklon Single Tank Reg Package
DGX Custom - Poseidon Cyklon Single Tank Reg Package DGX Custom - Poseidon Cyklon Single Tank Reg Package DGX Custom - Poseidon Cyklon Single Tank Reg Package DGX Custom - Poseidon Cyklon Single Tank Reg Package DGX Custom - Poseidon Cyklon Single Tank Reg Package

Everything you need for a high performance regulator setup in a single tank long hose configuration. The package using Poseidon Cyklon series regulators is completely assembled by Dive Gear Express and includes:

  • One Poseidon Cyklon Series First Stage and Two Cyklon Second Stages
  • One { 59 in | 1500 mm } or { 83 in | 2100 mm } LP hose and one { 28 in | 700 mm } LP hose, both Poseidon brand rubber Cyklon hoses.
  • One DGX Premium "Brass and Glass" SPG and one DGX { 26 in | 66 cm } HP rubber hose
  • DIN to Yoke spin-on adapter, Necklace, S/S Bolt Snaps, Delrin DIN Cap
  • Optional BC inflator hose is DGX rubber.

For single tank diving the package includes a DIN-to-Yoke adapter for use with both DIN and Yoke type tank valves. Visit our Poseidon Cyklon Regulators page for more information on the Cyklon regulators.

The Poseidon Cyklon second stage uses a unique fitting size that is NOT compatible with standard LP flex or rubber hoses.

More Information
SKU PK-781006
Weight 7.5000
There are no reviews yet Be the first to review this product
Only registered users can write reviews. Please, Sign in or create an account
Tek Tip Warning Image WARNING

Because of the history behind the Cyklon model second stage, there is a compatibility issue with modern standard hoses. The second stage 9/16-inch male fitting that accepts the female fitting on the hose will just barely seal with the #10 o-ring in the barrel of the hose fitting. It WILL seal, but if you pull hard on the hose at various angles you can usually find a position that will cause a slight 'fizz' of tiny bubbles at the fitting. We have tried the standard regulator hoses from a variety of suppliers and all seem to exhibit the issue to some degree with Cyklon model second stages. Dive Gear Express also offers third party hose adapters that allow our standard low-pressure rubber and flex hoses to be used with any Cyklon model second stage.

If you substitute a standard hose without an adapter, do NOT use undue force to over-tighten the hose fitting in an attempt to address this behavior. The second stage cracking pressure adjustment screw extends out in to the barrel of the fitting more than most second stage designs, and over-tightening will cause the hose fitting to bottom out against the end of the adjustment screw. This results in the second stage no longer being able to swivel on the hose, and possibly causes the cracking pressure adjustment to change as well.

Poseidon USA advises us that they are aware of this behavior, limited exclusively to Cyklon model second stages, and to address this issue they offer Cyklon specific OEM heavy rubber hoses. Dive Gear Express offers Cyklon specific OEM hoses in the only lengths available from Poseidon.



     

© Copyright 2009 to 2019 Dive Gear Express®
Message Icon
Message Icon