DGX Custom - Poseidon Cyklon Doubles Reg Package

$1,299.00
1 - 2 Weeks
SKU
PK-783001
The DGX Custom - Poseidon Cyklon Doubles Reg Package has everything you need for an ultra high performance regulator setup in a doubles configuration

DGX Custom - Poseidon Cyklon Doubles Reg Package

DGX Custom - Poseidon Cyklon Doubles Reg Package
DGX Custom - Poseidon Cyklon Doubles Reg Package DGX Custom - Poseidon Cyklon Doubles Reg Package DGX Custom - Poseidon Cyklon Doubles Reg Package DGX Custom - Poseidon Cyklon Doubles Reg Package
  • Complete Double tank long hose configuration
  • Assembled, tested and shipped to you ready-to-dive
  • Cold Water and Nitrox Ready
  • Includes FREE Tek Regulator Bag

Everything you need for an ultra high performance regulator setup in a doubles configuration. The package using Poseidon Cyklon regulators is completely assembled by Dive Gear Express and includes:

FREE Tek Reg Bag
  • Two Poseidon Cyklon First and Second Stages
  • One Backup LP hose
  • Choose length on one Primary LP Hose, one BC hose, one HP hose
  • One "Brass & Glass" SPG
  • Necklace, two S/S Bolt Snaps, two DIN Caps
  • FREE Tek Regulator Bag

Dive Gear Express only offers our Cyklon based DGX custom regulator packages with Poseidon OEM rubber Cyklon specific hoses in the available lengths of { 28 in | 700 mm }, { 35 in | 900 mm }, { 47 in | 1200 mm }, { 59 in | 1500 mm }, and { 83 in | 2100 mm }. Note that the shortest Poseidon OEM hose length available is six inches longer than the {22 in | 56 cm} hose length typically used for the backup regulator.

The Poseidon Cyklon second stage uses a unique fitting size that is NOT compatible with standard LP flex or rubber hoses.

Visit our Poseidon Cyklon Regulators page for more information on the Cyklon regulators.

More Information
SKU PK-783001
Weight (lbs) 10.0000
Brand Poseidon
There are no reviews yet Be the first to review this product
Only registered users can write reviews. Please, Sign in or create an account
Tek Tip Warning Image WARNING

Because of the history behind the Cyklon model second stage, there is a compatibility issue with modern standard hoses. The second stage 9/16-inch male fitting that accepts the female fitting on the hose will just barely seal with the #10 o-ring in the barrel of the hose fitting. It WILL seal, but if you pull hard on the hose at various angles you can usually find a position that will cause a slight 'fizz' of tiny bubbles at the fitting. We have tried the standard regulator hoses from a variety of suppliers and all seem to exhibit the issue to some degree with Cyklon model second stages. Dive Gear Express also offers third party hose adapters that allow our standard low-pressure rubber and flex hoses to be used with any Cyklon model second stage.

If you substitute a standard hose without an adapter, do NOT use undue force to over-tighten the hose fitting in an attempt to address this behavior. The second stage cracking pressure adjustment screw extends out in to the barrel of the fitting more than most second stage designs, and over-tightening will cause the hose fitting to bottom out against the end of the adjustment screw. This results in the second stage no longer being able to swivel on the hose, and possibly causes the cracking pressure adjustment to change as well.

Poseidon USA advises us that they are aware of this behavior, limited exclusively to Cyklon model second stages, and to address this issue they offer Cyklon specific OEM heavy rubber hoses. Dive Gear Express offers Cyklon specific OEM hoses in the only lengths available from Poseidon.



Conditions of Use    Privacy Notice   

© Copyright 2009 to 2018 Dive Gear Express®