Cyklon LP Regulator Hose (Poseidon)

As low as $59.95
Most Options - In Stock
Poseidon brand OEM low-pressure rubber regulator hose with a Cyklon specific second stage fitting.

Cyklon LP Regulator Hose (Poseidon)

Cyklon 27.5-Inch LP Regulator Hose
Cyklon 27.5-Inch LP Regulator Hose Comparison of Cyklon vs Standard Regulator Hose
  • Unique fittings for Poseidon Cyklon regulator only
  • Traditional rubber with chromed brass fittings
  • 3/8-inch male to 1st stage and Cyklon female to 2nd
  • All hoses are Nitrox Ready
  • Quality Poseidon Brand OEM hoses

These are brand name Poseidon hoses. Because of the history behind the Cyklon model second stage, there is a compatibility issue with modern standard hoses. Poseidon USA advises us that they are aware of this behavior, limited exclusively to Cyklon model second stages, and to address this issue they offer these Cyklon specific OEM heavy rubber hoses. Dive Gear Express offers these Cyklon specific OEM hoses in the only lengths available from Poseidon. Dive Gear Express also has third party hose adapters that allow our standard low-pressure rubber and flex hoses to be used with any Cyklon model second stage.

These Poseidon brand rubber low pressure regulator hoses are made specifically for scuba diving with chromed brass fittings. The hose has a standard 3/8-inch male at the end that screws into the first stage LP port, and at the other end you'll find a special female fitting that screws onto the second stage regulator body of the Poseidon Cyklon second stage. All of these hoses are Nitrox Ready.

The modern Cyklon first stages sold by Dive Gear Express have ports with industry standard Unified Standard Fine (UNF) thread forms: UNF3/8 for low-pressure and UNF7/16 for high pressure. The ports of modern Cyklon first stages are stamped IP for low-pressure (aka intermediate pressure) and HP for high-pressure. However, VERY OLD Cyklon first stages have outlet ports that are not standard. All the ports on those vintage first stages are a British Standard Pipe (BSP) Whitworth thread form. The trade name size is G1/8 and the body of these very early Cyklon first stages may be stamped with the "G1/8" identification. Poseidon makes the PDS-2415 Adapter: G1/8 Male to UNF3/8 Female (for low-pressure hoses) and also the PDS-2910 Adapter: G1/8 Male to UNF7/16 Female (for high-pressure hoses).

More Information
SKU PDS-31xx
Weight 0.200000
Brand Poseidon
Tek Tip Warning Image WARNING

Keep in mind that all hoses will fail sooner or later either due to age, storage conditions or handling. Scuba hoses, regardless of brand and materials, require some minimal care. Do not allow hoses to receive prolonged exposure sunlight, as the heat and UV from strong sunlight will significantly shorten the life of the hose. Do not attempt to flush the inside of the hose with any form of solvent or other chemical, new hoses are factory clean and if you have any reason to think they are no longer clean then the hose should be replaced. Prior to every dive trip you should always pressurize and inspect your hoses for mechanical damage, corroded fittings, bulges and leaks. Dive Gear Express suggests replacing all SCUBA regulator hoses every five years of service or 500 dives, whichever comes first.

Message Icon
Message Icon