Dive Gear Express Logo
Free Shipping
on qualifying orders 		Contact Us Shipping  |  Returns
 
  Home

SCUBA Repair Tools

 Pricelist  [Currency] 


T-2 Scuba Toolpack
+ Enlarge

In Stock

$24.95

T-2 Scuba Toolpack

This nearly indestructible SCUBA multi-tool is made with 420-series stainless steel, housed in an impact-resistant fiber thermoplastic handle with an ergonomic grip. This is a quality-engineered tool, backed by a limited lifetime warranty from Innovative Scuba Concepts. The multi-tool includes the most commonly used SCUBA repair tools, including a variety of open-end wrenches, hex keys, and screwdrivers. Also includes an O-ring pick, which is made of brass so its use won't damage the groove.

Open End Wrenches: 1/2", 9/16", 5/8", 11/16", 15mm
Hex Keys: 7/64", 1/8"
Screwdrivers: Phillips #1, Flat 1/8", Flat 3/16"

All-In-One Valve Repair Tool
+ Enlarge

In Stock

$49.95

All-In-One Valve Repair Tool

Considering the incredible amount of abuse they receive, cylinder valves are some of the most robust devices found in scuba diving. Even so, valves occasionally need disassembly and repair, but the tools needed are not commonly available. If you like to DIY, you'll need this handy little device. All-In-One Valve Repair Tool Close-up The All-In-One Valve Repair Tool includes all four tools needed to work on most scuba cylinder valves, including our brands from Thermo and Dive Rite (but not the Sherwood brand). The tools include: Handwheel Nut Driver, 11/16" Bonnet Nut Wrench, 3/8" Safety Assembly Wrench, and Seat Plug Driver. The tools are made from chrome plated steel, and the tool handle has been vinyl dipped for improved grip. A limited lifetime warranty from Innovative Scuba Concepts backs this quality-engineered tool.

Scuba Multi-Tool by XS Scuba
+ Enlarge

In Stock

$24.95

Scuba Multi-Tool by XS Scuba

The new SCUBA multi-tool by XS Scuba features stainless steel tools within a compact metal housing. This is a quality-engineered tool that includes eight of the most commonly used SCUBA repair tools, including a variety of hex wrenches, screwdrivers, an o-ring pick, and even a Schrader valve tool.

Scuba Multi-tool Package Back Details Compact Scuba Multi-Tool


Dimensions: 2.5"L x 1.4"W x .75"D
Weight: 4 ounces
Hex Wrenches: 1/4", 3/16", 5/32"
Screwdrivers: Valve Nut Slotted, Phillips, Flat
Other Tools: Schrader Valve Tool, O-ring Pick

Handwheel Nut Tool for Scuba Valves
+ Enlarge

In Stock

$4.95

Handwheel Nut Tool for Scuba Valves

If you need to remove or replace scuba valve handwheels (aka knobs) you will need the handwheel nut tool, which works on nearly all brands of scuba valves and handwheels. The handwheel nut, which screws on to the valve stem and retains the spring against the handwheel, requires a special slotted flat blade to remove or replace the nut. This low cost device, from the same people who make the popular Vindicator scuba valve handwheel, is a single purpose tool. We also offer two multi-purpose devices which include a slotted flat blade tool as well, see our All-In-One Valve Repair Tool or our Scuba Multi-Tool.

To use, close the valve and while holding the handwheel to keep it from spinning insert the blade into end of the valve handwheel and on to the matching slots of the spring retaining nut. While pushing in slightly, use the tool to unscrew the nut from the stem to free the spring and handwheel. To reassemble, push the handwheel on to the valve stem, then insert the spring followed by the nut in to the end of the handwheel. While pushing the nut firmly against the stem, capturing the spring, screw in the nut. Screw the nut in until the end of the stem is flush with the top of the nut. The stem should not protrude past the top of the nut or the spring will be too compressed and the handwheel will be difficult to operate. A small amount of 'play' in the handwheel is normal, as this improves its impact resistance.

Inflator Service Tool w/O-Ring Kit
+ Enlarge

In Stock

$8.50

Inflator Service Tool w/O-Ring Kit

This stainless steel Inflator Service Tool from DSS has three openings that allow easy disassembly of the most widely used power inflator found on Dive Rite, Hollis, Halcyon, OMS, OxyCheq and many other brands. With our tool we also include a complete set of replacement Viton O-rings for the inflator.

  • 1/2" hex wrench for the low pressure quick release nipple
  • Special spanner with two bent tangs which fit the slots in the inlet valve cartridge assembly and facilitates its easy removal
  • 1/4" hex to keep the end of the valve spool in place while removing the plastic button from the cartridge valve assembly
  • Includes the five Viton O-rings found in the inflator: 112-V90B, 012-V90B, 011-V90B, and two 006-V75B.


Tek Tip Tek Tip Symbol

How to Overhaul a Power Inflator

Removing Quick Release Nipple Removing Cartridge Valve Assembly QR Nipple and Cartridge Valve Assembly Removed Disassembling Cartridge Valve Inflator Completely Disassembled

If the base of the inflator QD fitting is leaking, use the 1/2" hex to remove the fitting and replace the o-ring. However, look closely if you see a leak. Sometimes the leak is not coming from the base of the fitting, but rather from the connection to the hose. There is a small o-ring in the female end of the hose fitting that is more frequently the source of the leak.

If the inflator is dribbling gas into the BC, you will have to completely overhaul the inflator. Start by mating the spanner tangs to the two slots of the inlet valve cartridge assembly, then unscrew counter clockwise until the entire assembly can be removed.

Now disassemble the cartridge assembly. Use the 1/4" hex to keep the end of the spool from turning while you unscrew the plastic button. Once the button separates from the spool, push the spool out from cartridge barrel. Remove all the o-rings (noting their relative positions and sizes) and clean everything, including the inside of the barrel and the plastic body of the inflator, by soaking in white vinegar and water. If need be, scrub with a light application of a toothbrush.

Replace the o-rings and reassemble. The o-rings must be clean and need not be lubricated. Some people lubricate the small 006 o-rings to provide a smoother operating feel, but we observe they are not lubricated at the factory in new inflators. (We do not lubricate because we think it attracts dirt and just gums up the works so that it has to be more frequently cleaned.) Tighten until snug, but do not over tighten or you will crack the plastic body. If the inflator still leaks or begins to leak within a few dives, then the surfaces which the o-rings seal against are worn and the entire inflator assembly should be replaced.

A few words of caution: This service kit is a great save-a-dive solution but our recommendation is to replace, not service, your power inflator if it develops any problems. The power inflator is not generally considered to be a 'user servicable' device. Improper service could cause a failure of buoyancy control, which has serious and life threatening consequences.


DR Tech Roll Up Tool Bag
+ Enlarge

In Stock

$28.00

DR Tech Roll Up Tool Bag

Roll Up Tool Bag Interior Experienced divers always carry spares and tools. Based on designs from the motorcycle industry, the Dive Rite Tech Tool Bag holds all the essentials in a compact roll-up design. Designed specifically for common tools needed to repair diving equipment, the tool bag holds any of our various scuba multi-tools plus screwdrivers, wrenches, pliers, hex keys, picks, tie wraps, and even small parts like o-rings and air spools. Silicon gripper inside the stretch pockets keeps tools in place while a zipper pocket keeps smaller necessities secure.

The tools pictured are for illustrative purposes only and are NOT included.

Pricing for Scuba Tools

Image Item SKU Description Ship Status US $ Price
[]
T-2 Scuba Toolpack  INV-TM0421 T-2 Scuba Toolpack In Stock  $24.95
All-In-One Valve Repair Tool  INV-CX0502 All-In-One Valve Repair Tool In Stock  $49.95
Scuba Multi-Tool by XS Scuba  XSS-TL110 Scuba Multi-Tool by XS Scuba In Stock  $24.95
Handwheel Nut Tool for Scuba Valves  STK-V110 Handwheel Nut Tool for Scuba Valves In Stock  $4.95
Inflator Service Tool w/O-Ring Kit  FX-82002KIT Inflator Service Tool w/O-Ring Kit In Stock  $8.50
 FX-2055RK Genuine Viton BC Inflator O-ring Kit, 5 pieces total, one 112, 012, 011, two 006 In Stock  $3.00
DR Tech Roll Up Tool Bag  DR-LW414 DR Tech Roll Up Tool Bag In Stock  $28.00
All Dive Gear Express financial transactions are in United States Dollars (US $).
Prices in currencies other than US $ are approximations and should be used as a guide only.

Having trouble finding something?
Try using our Google custom search engine:
Customer Support Still having trouble?
Talk to our people, like Joyce:
Contact Us via e-mail or telephone
We'll see what we can do to help you.
 Your complete satisfaction is our goal.
Dive Gear Express is an authorized dealer for all of the new, first quality, genuine brand name scuba diving equipment we sell.
 

About Us  |   Contact Us  |   Ordering  |   Returns  |   Shipping


BCs  |   Computers  |   Drysuits/DPVs  |   Fins/Masks  |   Gas/Tanks  |   Hardware  |   Lights  |   Manuals  |   Rebreathers  |   Regulators/SPGs  |   Tools
Small Clear Image

© Copyright 2012   |   Terms & Conditions   |   Privacy Statement

Convert e-commerce currencies