In Stock

> Eezy Cut Trilobite Line Cutter

The Eezy Cut Trilobite has a very sharp cutting mechanism that provides a quick and efficient cut. The ergonomic design provides a longer section of the cutting edge and causes the line to be pushed onto the blade by the frame of the tool. This design makes the cut more stable, which in turn provides a quicker cleaner cut and retains the blade's edge by distributing the cut across the entire blade. The Trilobite is able to cut line up to a width of 8mm and can easily cut 2-inch webbing. The tool is mounted to a polypropylene handle with a velcro strap for attaching to the pouch, and comes in a choice of pouches. The Harness Pouch can be mounted on any 2-inch harness webbing and the small size of the Trilobite means it can be located on any area of a diver's configuration. The Wrist Pouch can be mounted on straps up to 1.125 inches wide, which fits most dive computers, and ensures a snug, movement-free fit. A hole in the back of the Wrist Pouch allows for mounting with a clip, or to a side pocket lanyard.

In Stock

> Dive Rite Daisy-Chain Cutting Tools

These cutting device sheaths can also be worn on a standard 2-inch waist belt. These sheaths also include a special Annex clip that allows them attach to the pocket daisy chain loops on Dive Rite's harness pockets, using heavy-duty Annex clips that slip through daisy chain loops and snap into place. These clips are rugged and won't come unclasped underwater. To remove, you must pinch the ends slightly to get the clip to release... easy enough, but not so easy that it comes undone all on its own. The sheath clip will also close around cylinder hose retainers, wrist straps, gaiters or a chest strap. A quick-release Velcro lanyard keeps the cutting tools securely in place.

In Stock

Waistbelt Sheath w/Knife and Shears

A hogarthian waistbelt webbing sheath that is hot-knife trimmed and professionally stitched and can hold either a knife or EMT shears, both are included. Cave divers will load the traditional hogarthian line cutting tool, a blunt-tip knife with a very sharp stainless steel 2-inch serrated blade. For open water and wreck diving, load the sheath with heavy-duty EMT shears that have salt-water ready stainless steel construction coated with industrial titanium nitride for longer lasting edges that resist corrosion.

In Stock

> Z-Knife

Dive Rite also offers the following alternatives to the Z-knife 2-inch belt mount pouch:

The 1-inch strap mount employs a simple 1-inch slot in the pouch. This makes mounting your Z-knife to your computer strap, chest strap, or other 1-inch webbing ideal.

The Vertical shoulder mount employs two Velcro loops: one to attach to a two-inch shoulder strap, and the other to secure to a D-ring, belt slide, etc. (D-ring and belt slide not included.)

In Stock

Jon Line w/Carabiner

Despite ripping currents and crowded ascent lines, you can hang on the ascent line at a desired depth with Dive Rite's jon line. The jon line allows multiple divers to stay at the same depth on one line, and keeps you from being pulled up and down by a pitching and rolling boat in rough seas. This allows you to maintain a specific depth for decompression or safety stops while maintaining contact with the line. It easily clips into an anchor line or down line, just as easily unlocks from the line making depth changes effortless. The Jon Line with Carabiner contains six feet of 1.0-inch nylon webbing with a stainless steel carabiner and is stored in a handy dispenser that fits on any 2.0-inch harness webbing.